Historical task source. The Eve task board holds current task state.
Phase 33: Oya - AI-Controlled Drone & Swarm Management Platform#
Domain Name: Oya (Yoruba goddess of wind, storms, lightning, and transformation) Scope: scope:oya Type: Platform Capability Domain Purpose: Comprehensive AI-controlled drone and swarm management capabilities consumed by product domains (Lilith, Yemaya, Aphrodite)
The Oya domain provides multi-drone coordination, AI-powered autonomous cinematography, indoor/outdoor navigation, real-time pose estimation integration, hardware abstraction for multiple drone platforms, sensor fusion, and edge AI processing.
33.1 Core Infrastructure#
33.1.1 Core Types and Definitions#
Foundation type system for drone operations, providing type-safe interfaces for all Oya subsystems.
- 33.1.1.1 Create
DroneIdbranded type with UUID validation - 33.1.1.2 Create
SwarmIdbranded type for swarm identification - 33.1.1.3 Create
MissionIdbranded type for mission tracking - 33.1.1.4 Create
WaypointIdbranded type for waypoint references - 33.1.1.5 Implement
Position3Dtype (latitude, longitude, altitude) - 33.1.1.6 Implement
Velocity3Dtype (vx, vy, vz in m/s) - 33.1.1.7 Implement
Acceleration3Dtype (ax, ay, az in m/s²) - 33.1.1.8 Implement
Orientationtype (roll, pitch, yaw in radians) - 33.1.1.9 Implement
Quaterniontype for rotation representation - 33.1.1.10 Implement
EulerAnglestype with conversion utilities - 33.1.1.11 Create
GPSCoordinatestype with WGS84 validation - 33.1.1.12 Create
LocalCoordinatestype (NED frame) - 33.1.1.13 Create
BodyCoordinatestype (drone body frame) - 33.1.1.14 Implement coordinate frame transformation utilities
- 33.1.1.15 Create
BatteryStatetype (voltage, current, percentage, time remaining) - 33.1.1.16 Create
FlightModeenum (Manual, Stabilized, Altitude, Position, Mission, RTH, Land) - 33.1.1.17 Create
DroneStateenum (Idle, Armed, TakingOff, Flying, Hovering, Landing, Emergency) - 33.1.1.18 Create
ConnectionStatusenum (Disconnected, Connecting, Connected, Lost) - 33.1.1.19 Implement
Telemetrycomposite type aggregating all sensor data - 33.1.1.20 Implement
DroneCapabilitiestype describing drone features - 33.1.1.21 Create
CameraSettingstype (resolution, FPS, codec, FOV) - 33.1.1.22 Create
GimbalStatetype (pan, tilt, roll angles) - 33.1.1.23 Create
PayloadInfotype for attached payloads - 33.1.1.24 Implement
WeatherConditionstype (wind, temperature, humidity) - 33.1.1.25 Implement
AirspaceClassenum for regulatory compliance - 33.1.1.26 Create
GeofenceZonetype (polygon/circle, altitude limits, behavior) - 33.1.1.27 Create
Waypointtype (position, speed, heading, actions) - 33.1.1.28 Create
Missiontype (waypoints, constraints, metadata) - 33.1.1.29 Implement
FlightPlantype with validation rules - 33.1.1.30 Implement
EmergencyProceduretype (RTH, Land, Hover, Terminate)
33.1.2 Physical Constants and Limits#
Comprehensive constants for physics simulation, safety limits, and hardware constraints.
- 33.1.2.1 Define gravitational constant (9.80665 m/s²)
- 33.1.2.2 Define air density at sea level (1.225 kg/m³)
- 33.1.2.3 Implement air density calculation by altitude
- 33.1.2.4 Define standard atmospheric pressure model
- 33.1.2.5 Create temperature lapse rate constants
- 33.1.2.6 Define Earth radius constants (equatorial, polar, mean)
- 33.1.2.7 Implement WGS84 ellipsoid parameters
- 33.1.2.8 Define maximum safe wind speeds by drone class
- 33.1.2.9 Define maximum altitude limits by regulation (FAA 400ft AGL)
- 33.1.2.10 Define minimum safe operating temperatures
- 33.1.2.11 Define maximum safe operating temperatures
- 33.1.2.12 Create battery chemistry constants (LiPo, Li-ion)
- 33.1.2.13 Define propeller efficiency curves
- 33.1.2.14 Define motor KV rating to thrust relationships
- 33.1.2.15 Create ESC response time constants
- 33.1.2.16 Define PID controller default gains by drone type
- 33.1.2.17 Create maximum angular velocity limits
- 33.1.2.18 Define maximum linear acceleration limits
- 33.1.2.19 Create noise level limits by regulation (EU 60dB)
- 33.1.2.20 Define communication range limits by protocol
33.1.3 Common Utilities#
Shared utility functions for mathematical operations, conversions, and data processing.
- 33.1.3.1 Implement Haversine distance calculation
- 33.1.3.2 Implement Vincenty distance calculation (high precision)
- 33.1.3.3 Create bearing calculation between GPS points
- 33.1.3.4 Create destination point calculation from bearing/distance
- 33.1.3.5 Implement coordinate system conversions (GPS ↔ NED ↔ Body)
- 33.1.3.6 Implement quaternion to Euler conversion
- 33.1.3.7 Implement Euler to quaternion conversion
- 33.1.3.8 Create rotation matrix utilities
- 33.1.3.9 Implement SLERP for quaternion interpolation
- 33.1.3.10 Create linear interpolation utilities
- 33.1.3.11 Implement cubic spline interpolation
- 33.1.3.12 Create B-spline curve generation
- 33.1.3.13 Implement Bezier curve utilities
- 33.1.3.14 Create moving average filter
- 33.1.3.15 Implement exponential moving average filter
- 33.1.3.16 Create Kalman filter implementation
- 33.1.3.17 Implement Extended Kalman Filter (EKF)
- 33.1.3.18 Create complementary filter for IMU fusion
- 33.1.3.19 Implement Madgwick filter for orientation
- 33.1.3.20 Create low-pass filter utilities
- 33.1.3.21 Implement high-pass filter utilities
- 33.1.3.22 Create band-pass filter utilities
- 33.1.3.23 Implement rate limiter utility
- 33.1.3.24 Create dead-band filter utility
- 33.1.3.25 Implement PID controller class
- 33.1.3.26 Create cascaded PID controller
- 33.1.3.27 Implement anti-windup for PID controllers
- 33.1.3.28 Create geofence containment check utilities
- 33.1.3.29 Implement polygon point-in-polygon test
- 33.1.3.30 Create circle containment test
- 33.1.3.31 Implement 3D bounding box utilities
- 33.1.3.32 Create collision detection primitives
- 33.1.3.33 Implement timestamp synchronization utilities
- 33.1.3.34 Create unit conversion utilities (imperial ↔ metric)
- 33.1.3.35 Implement checksum calculation (CRC8, CRC16, CRC32)
33.1.4 Domain-Specific Errors#
Comprehensive error taxonomy for drone operations with actionable error codes.
- 33.1.4.1 Create
OyaErrorbase error class - 33.1.4.2 Implement
ConnectionErrorwith reconnection hints - 33.1.4.3 Implement
AuthenticationErrorfor SDK authentication - 33.1.4.4 Create
CommandErrorfor rejected commands - 33.1.4.5 Create
TimeoutErrorwith configurable thresholds - 33.1.4.6 Implement
BatteryError(low, critical, failure) - 33.1.4.7 Implement
GPSError(no fix, poor accuracy, spoofing detected) - 33.1.4.8 Create
IMUError(calibration, drift, failure) - 33.1.4.9 Create
MotorError(overheat, blocked, failure) - 33.1.4.10 Implement
ESCErrorwith motor identification - 33.1.4.11 Implement
CompassError(interference, calibration needed) - 33.1.4.12 Create
BarometerErrorfor altitude sensing issues - 33.1.4.13 Create
CameraError(connection, storage, encoding) - 33.1.4.14 Implement
GimbalError(calibration, motor, limits) - 33.1.4.15 Implement
GeofenceViolationwith zone details - 33.1.4.16 Create
AltitudeLimitError(max/min exceeded) - 33.1.4.17 Create
SpeedLimitErrorwith current/max values - 33.1.4.18 Implement
CollisionWarningwith obstacle details - 33.1.4.19 Implement
WeatherError(wind, temperature, precipitation) - 33.1.4.20 Create
MissionError(invalid waypoint, unreachable) - 33.1.4.21 Create
SwarmError(coordination failure, lost drone) - 33.1.4.22 Implement
CommunicationError(signal loss, interference) - 33.1.4.23 Implement
PayloadError(weight, balance, connection) - 33.1.4.24 Create
RegulatoryError(airspace violation, no authorization) - 33.1.4.25 Create
EmergencyError(requiring immediate action) - 33.1.4.26 Implement error serialization for telemetry
- 33.1.4.27 Implement error recovery suggestions system
- 33.1.4.28 Create error severity classification (Info, Warning, Error, Critical, Fatal)
- 33.1.4.29 Implement error aggregation for swarm operations
- 33.1.4.30 Create error logging integration with telemetry system
33.2 Flight Control Systems#
33.2.1 Drone Kinematics#
Mathematical models for drone motion, dynamics, and physics simulation.
- 33.2.1.1 Implement 6-DOF rigid body dynamics model
- 33.2.1.2 Create quadrotor dynamics equations
- 33.2.1.3 Create hexarotor dynamics equations
- 33.2.1.4 Create octorotor dynamics equations
- 33.2.1.5 Implement coaxial rotor dynamics
- 33.2.1.6 Create thrust-to-weight ratio calculator
- 33.2.1.7 Implement motor mixing matrix for X-configuration
- 33.2.1.8 Implement motor mixing matrix for +-configuration
- 33.2.1.9 Implement motor mixing matrix for H-configuration
- 33.2.1.10 Create custom motor mixing matrix generator
- 33.2.1.11 Implement propeller thrust model (momentum theory)
- 33.2.1.12 Implement propeller torque model
- 33.2.1.13 Create blade element theory implementation
- 33.2.1.14 Implement ground effect modeling
- 33.2.1.15 Create ceiling effect modeling
- 33.2.1.16 Implement propeller wash interaction model
- 33.2.1.17 Create aerodynamic drag model
- 33.2.1.18 Implement wind disturbance model
- 33.2.1.19 Create turbulence simulation (Dryden model)
- 33.2.1.20 Implement gust response model
- 33.2.1.21 Create inertia tensor calculator from CAD
- 33.2.1.22 Implement center of gravity estimation
- 33.2.1.23 Create payload effect on dynamics
- 33.2.1.24 Implement motor response time modeling
- 33.2.1.25 Create ESC dynamics model
- 33.2.1.26 Implement battery voltage sag model
- 33.2.1.27 Create motor efficiency curves
- 33.2.1.28 Implement power consumption estimation
- 33.2.1.29 Create flight time prediction model
- 33.2.1.30 Implement controllability analysis tools
33.2.2 Attitude Control#
Stabilization and orientation control systems for precise drone maneuvering.
- 33.2.2.1 Implement attitude rate controller (inner loop)
- 33.2.2.2 Implement attitude angle controller (outer loop)
- 33.2.2.3 Create cascaded attitude control architecture
- 33.2.2.4 Implement roll rate PID controller
- 33.2.2.5 Implement pitch rate PID controller
- 33.2.2.6 Implement yaw rate PID controller
- 33.2.2.7 Create roll angle PID controller
- 33.2.2.8 Create pitch angle PID controller
- 33.2.2.9 Create yaw angle PID controller
- 33.2.2.10 Implement quaternion-based attitude control
- 33.2.2.11 Create SO(3) geometric attitude control
- 33.2.2.12 Implement attitude setpoint generation
- 33.2.2.13 Create smooth attitude transitions
- 33.2.2.14 Implement attitude rate limiting
- 33.2.2.15 Create attitude feedforward control
- 33.2.2.16 Implement gyro bias estimation
- 33.2.2.17 Create accelerometer-based level detection
- 33.2.2.18 Implement magnetometer heading fusion
- 33.2.2.19 Create attitude estimation EKF
- 33.2.2.20 Implement complementary filter attitude estimation
- 33.2.2.21 Create Madgwick AHRS integration
- 33.2.2.22 Implement Mahony AHRS integration
- 33.2.2.23 Create motor saturation handling
- 33.2.2.24 Implement control allocation optimization
- 33.2.2.25 Create motor failure detection
- 33.2.2.26 Implement motor failure compensation
- 33.2.2.27 Create auto-tune functionality for PIDs
- 33.2.2.28 Implement gain scheduling by flight condition
- 33.2.2.29 Create attitude control telemetry
- 33.2.2.30 Implement control loop timing diagnostics
33.2.3 Velocity Control#
Speed regulation and velocity hold systems for smooth flight.
- 33.2.3.1 Implement horizontal velocity controller
- 33.2.3.2 Implement vertical velocity controller
- 33.2.3.3 Create body-frame velocity control
- 33.2.3.4 Create earth-frame velocity control
- 33.2.3.5 Implement velocity setpoint smoothing
- 33.2.3.6 Create velocity rate limiting
- 33.2.3.7 Implement velocity-to-attitude conversion
- 33.2.3.8 Create feed-forward velocity control
- 33.2.3.9 Implement wind compensation
- 33.2.3.10 Create GPS velocity integration
- 33.2.3.11 Implement optical flow velocity estimation
- 33.2.3.12 Create velocity estimation EKF
- 33.2.3.13 Implement accelerometer velocity integration
- 33.2.3.14 Create velocity sensor fusion
- 33.2.3.15 Implement max velocity enforcement
- 33.2.3.16 Create sport/normal mode velocity profiles
- 33.2.3.17 Implement cinematic smooth velocity mode
- 33.2.3.18 Create tripod mode (ultra-slow velocity)
- 33.2.3.19 Implement velocity hold mode
- 33.2.3.20 Create brake-to-hover transition
33.2.4 Position Control#
Precise position hold and movement systems for autonomous flight.
- 33.2.4.1 Implement horizontal position controller
- 33.2.4.2 Implement vertical position (altitude) controller
- 33.2.4.3 Create position-to-velocity conversion
- 33.2.4.4 Implement GPS position hold
- 33.2.4.5 Create RTK-GPS precision position hold
- 33.2.4.6 Implement VIO position hold
- 33.2.4.7 Create UWB position hold
- 33.2.4.8 Implement position sensor fusion
- 33.2.4.9 Create position setpoint smoothing
- 33.2.4.10 Implement position rate limiting
- 33.2.4.11 Create loiter mode with configurable radius
- 33.2.4.12 Implement circle mode
- 33.2.4.13 Create orbit mode around POI
- 33.2.4.14 Implement cable cam mode (linear tracking)
- 33.2.4.15 Create position error recovery
- 33.2.4.16 Implement altitude hold modes (barometric, GPS, terrain)
- 33.2.4.17 Create terrain following mode
- 33.2.4.18 Implement altitude AGL maintenance
- 33.2.4.19 Create altitude MSL maintenance
- 33.2.4.20 Implement geofence position clamping
33.2.5 Mission Execution#
Autonomous waypoint navigation and mission management systems.
- 33.2.5.1 Implement mission upload protocol
- 33.2.5.2 Create mission validation engine
- 33.2.5.3 Implement waypoint sequencing
- 33.2.5.4 Create waypoint navigation state machine
- 33.2.5.5 Implement waypoint acceptance radius logic
- 33.2.5.6 Create curved waypoint transitions (spline)
- 33.2.5.7 Implement straight-line waypoint navigation
- 33.2.5.8 Create stop-and-turn waypoint mode
- 33.2.5.9 Implement flythrough waypoint mode
- 33.2.5.10 Create heading control modes (auto, fixed, POI, next WP)
- 33.2.5.11 Implement speed profiles per waypoint
- 33.2.5.12 Create altitude profiles per waypoint
- 33.2.5.13 Implement waypoint actions (photo, video, gimbal)
- 33.2.5.14 Create conditional waypoint execution
- 33.2.5.15 Implement mission pause/resume
- 33.2.5.16 Create mission abort procedures
- 33.2.5.17 Implement mission progress tracking
- 33.2.5.18 Create mission ETA calculation
- 33.2.5.19 Implement battery-aware mission planning
- 33.2.5.20 Create dynamic mission modification
- 33.2.5.21 Implement mission replay from logs
- 33.2.5.22 Create mission templates library
- 33.2.5.23 Implement survey/mapping mission patterns
- 33.2.5.24 Create inspection mission patterns
- 33.2.5.25 Implement search and rescue patterns
- 33.2.5.26 Create rally point (safe landing) system
- 33.2.5.27 Implement return-to-home logic
- 33.2.5.28 Create smart RTH (obstacle-aware)
- 33.2.5.29 Implement RTH altitude selection logic
- 33.2.5.30 Create mission failsafe behaviors
33.3 Navigation Systems#
33.3.1 GPS Navigation#
Satellite-based positioning systems with multi-constellation support.
- 33.3.1.1 Implement NMEA 0183 parser
- 33.3.1.2 Create UBX protocol parser (u-blox)
- 33.3.1.3 Implement GPS fix quality assessment
- 33.3.1.4 Create HDOP/VDOP/PDOP calculation
- 33.3.1.5 Implement GPS accuracy estimation
- 33.3.1.6 Create multi-constellation support (GPS, GLONASS, Galileo, BeiDou)
- 33.3.1.7 Implement SBAS augmentation (WAAS, EGNOS)
- 33.3.1.8 Create RTK-GPS base station interface
- 33.3.1.9 Implement RTK rover processing
- 33.3.1.10 Create RTK correction data streaming (RTCM3)
- 33.3.1.11 Implement NTRIP client for RTK corrections
- 33.3.1.12 Create PPK (post-processed kinematic) support
- 33.3.1.13 Implement GPS spoofing detection
- 33.3.1.14 Create GPS jamming detection
- 33.3.1.15 Implement GPS health monitoring
- 33.3.1.16 Create GPS-IMU fusion (loose coupling)
- 33.3.1.17 Implement GPS-IMU fusion (tight coupling)
- 33.3.1.18 Create GPS velocity calculation
- 33.3.1.19 Implement GPS heading (dual antenna)
- 33.3.1.20 Create GPS altitude correction (geoid separation)
- 33.3.1.21 Implement coordinate system conversions (ECEF, ENU, NED)
- 33.3.1.22 Create GPS time synchronization
- 33.3.1.23 Implement leap second handling
- 33.3.1.24 Create GPS logging for post-processing
- 33.3.1.25 Implement GPS simulation for testing
33.3.2 Indoor Positioning#
GPS-denied navigation using UWB, VIO, motion capture, and SLAM.
- 33.3.2.1 Implement UWB TWR (Two-Way Ranging) protocol
- 33.3.2.2 Create UWB TDoA positioning algorithm
- 33.3.2.3 Implement UWB anchor calibration
- 33.3.2.4 Create UWB tag integration (DWM1001, Pozyx)
- 33.3.2.5 Implement LinkTrack UWB system integration
- 33.3.2.6 Create Pozyx UWB system integration
- 33.3.2.7 Implement Marvelmind beacon system integration
- 33.3.2.8 Create UWB multipath mitigation
- 33.3.2.9 Implement UWB NLOS detection
- 33.3.2.10 Create UWB-IMU sensor fusion
- 33.3.2.11 Implement Visual-Inertial Odometry (VIO) pipeline
- 33.3.2.12 Create VINS-Mono integration
- 33.3.2.13 Implement VINS-Fusion integration
- 33.3.2.14 Create ROVIO integration
- 33.3.2.15 Implement OKVIS integration
- 33.3.2.16 Create Intel RealSense T265 tracking integration
- 33.3.2.17 Implement feature tracking with optical flow
- 33.3.2.18 Create sparse feature VIO
- 33.3.2.19 Implement dense VIO with depth
- 33.3.2.20 Create VIO initialization procedures
- 33.3.2.21 Implement VIO scale estimation
- 33.3.2.22 Create VIO drift correction
- 33.3.2.23 Implement motion capture system integration (OptiTrack)
- 33.3.2.24 Create Vicon motion capture integration
- 33.3.2.25 Implement Qualisys motion capture integration
- 33.3.2.26 Create VRPN protocol client
- 33.3.2.27 Implement NatNet protocol client
- 33.3.2.28 Create motion capture to local frame transformation
- 33.3.2.29 Implement motion capture latency compensation
- 33.3.2.30 Create hybrid indoor/outdoor transition handling
33.3.3 Visual SLAM#
Simultaneous localization and mapping for autonomous navigation.
- 33.3.3.1 Implement ORB-SLAM3 integration (mono)
- 33.3.3.2 Create ORB-SLAM3 stereo mode
- 33.3.3.3 Implement ORB-SLAM3 RGB-D mode
- 33.3.3.4 Create ORB-SLAM3 visual-inertial mode
- 33.3.3.5 Implement RTAB-Map integration
- 33.3.3.6 Create LSD-SLAM integration
- 33.3.3.7 Implement DSO (Direct Sparse Odometry) integration
- 33.3.3.8 Create LDSO (with loop closure) integration
- 33.3.3.9 Implement Isaac ROS Visual SLAM integration
- 33.3.3.10 Create map initialization procedures
- 33.3.3.11 Implement keyframe selection strategies
- 33.3.3.12 Create loop closure detection
- 33.3.3.13 Implement pose graph optimization
- 33.3.3.14 Create bundle adjustment optimization
- 33.3.3.15 Implement map point culling
- 33.3.3.16 Create relocalization after tracking loss
- 33.3.3.17 Implement map saving/loading
- 33.3.3.18 Create map merging for multi-session
- 33.3.3.19 Implement dense reconstruction
- 33.3.3.20 Create occupancy grid generation
- 33.3.3.21 Implement 3D mesh generation from SLAM
- 33.3.3.22 Create semantic SLAM integration
- 33.3.3.23 Implement dynamic object filtering
- 33.3.3.24 Create SLAM quality metrics
- 33.3.3.25 Implement SLAM failure detection and recovery
33.3.4 Path Planning#
Optimal route computation with obstacle avoidance.
- 33.3.4.1 Implement A* pathfinding algorithm
- 33.3.4.2 Create weighted A* variant
- 33.3.4.3 Implement Dijkstra's algorithm
- 33.3.4.4 Create D* Lite (dynamic replanning)
- 33.3.4.5 Implement RRT (Rapidly-exploring Random Tree)
- 33.3.4.6 Create RRT* (optimal RRT)
- 33.3.4.7 Implement RRT-Connect (bidirectional)
- 33.3.4.8 Create Informed RRT*
- 33.3.4.9 Implement PRM (Probabilistic Roadmap)
- 33.3.4.10 Create potential field method
- 33.3.4.11 Implement artificial potential field navigation
- 33.3.4.12 Create velocity obstacles (VO) method
- 33.3.4.13 Implement reciprocal velocity obstacles (RVO)
- 33.3.4.14 Create 3D occupancy grid representation
- 33.3.4.15 Implement Octomap integration
- 33.3.4.16 Create voxel-based collision checking
- 33.3.4.17 Implement configuration space (C-space) planning
- 33.3.4.18 Create kinodynamic planning
- 33.3.4.19 Implement trajectory optimization (CHOMP)
- 33.3.4.20 Create trajectory optimization (STOMP)
- 33.3.4.21 Implement trajectory optimization (TrajOpt)
- 33.3.4.22 Create minimum snap trajectory generation
- 33.3.4.23 Implement minimum jerk trajectory generation
- 33.3.4.24 Create polynomial trajectory optimization
- 33.3.4.25 Implement time-optimal trajectory planning
- 33.3.4.26 Create energy-optimal trajectory planning
- 33.3.4.27 Implement corridor-constrained planning
- 33.3.4.28 Create dynamic obstacle avoidance
- 33.3.4.29 Implement MPC-based path planning
- 33.3.4.30 Create real-time replanning system
33.3.5 Obstacle Avoidance#
Multi-sensor collision prevention systems.
- 33.3.5.1 Implement depth camera obstacle detection
- 33.3.5.2 Create stereo vision obstacle detection
- 33.3.5.3 Implement monocular depth estimation
- 33.3.5.4 Create ToF sensor integration
- 33.3.5.5 Implement ultrasonic sensor integration
- 33.3.5.6 Create LiDAR obstacle detection
- 33.3.5.7 Implement radar obstacle detection
- 33.3.5.8 Create multi-sensor fusion for obstacles
- 33.3.5.9 Implement 360-degree sensing coverage
- 33.3.5.10 Create obstacle tracking (Kalman filter)
- 33.3.5.11 Implement obstacle velocity estimation
- 33.3.5.12 Create collision time-to-impact calculation
- 33.3.5.13 Implement avoidance maneuver generation
- 33.3.5.14 Create upward/downward obstacle avoidance
- 33.3.5.15 Implement lateral obstacle avoidance
- 33.3.5.16 Create brake-to-hover obstacle response
- 33.3.5.17 Implement fly-around obstacle response
- 33.3.5.18 Create ascend/descend obstacle response
- 33.3.5.19 Implement wire detection algorithms
- 33.3.5.20 Create small obstacle detection (poles, branches)
- 33.3.5.21 Implement glass/transparent surface detection
- 33.3.5.22 Create water surface detection
- 33.3.5.23 Implement moving obstacle prediction
- 33.3.5.24 Create human detection and avoidance
- 33.3.5.25 Implement animal detection and avoidance
- 33.3.5.26 Create vehicle detection and tracking
- 33.3.5.27 Implement aircraft detection (ADSB, visual)
- 33.3.5.28 Create obstacle avoidance confidence scoring
- 33.3.5.29 Implement failsafe when avoidance impossible
- 33.3.5.30 Create obstacle avoidance telemetry and logging
33.4 Swarm Coordination#
33.4.1 Multi-Agent Coordination#
Distributed systems for coordinating multiple drones simultaneously.
- 33.4.1.1 Implement swarm manager service
- 33.4.1.2 Create drone registration/deregistration protocol
- 33.4.1.3 Implement swarm heartbeat monitoring
- 33.4.1.4 Create drone health aggregation
- 33.4.1.5 Implement swarm state machine
- 33.4.1.6 Create synchronized takeoff procedures
- 33.4.1.7 Implement synchronized landing procedures
- 33.4.1.8 Create swarm emergency stop
- 33.4.1.9 Implement leader-follower architecture
- 33.4.1.10 Create virtual leader coordination
- 33.4.1.11 Implement decentralized coordination
- 33.4.1.12 Create consensus-based coordination
- 33.4.1.13 Implement behavior-based coordination
- 33.4.1.14 Create auction-based task assignment
- 33.4.1.15 Implement contract net protocol
- 33.4.1.16 Create swarm priority system
- 33.4.1.17 Implement time synchronization across swarm
- 33.4.1.18 Create reference frame alignment
- 33.4.1.19 Implement inter-drone distance maintenance
- 33.4.1.20 Create swarm boundary enforcement
- 33.4.1.21 Implement swarm mission planning
- 33.4.1.22 Create multi-drone waypoint assignment
- 33.4.1.23 Implement swarm progress tracking
- 33.4.1.24 Create swarm abort procedures
- 33.4.1.25 Implement lost drone handling
- 33.4.1.26 Create drone replacement protocol
- 33.4.1.27 Implement swarm scaling (add/remove drones)
- 33.4.1.28 Create swarm telemetry aggregation
- 33.4.1.29 Implement swarm visualization data stream
- 33.4.1.30 Create swarm simulation mode
33.4.2 Collision Avoidance (Multi-Agent)#
ORCA and other algorithms for collision-free swarm operation.
- 33.4.2.1 Implement ORCA (Optimal Reciprocal Collision Avoidance)
- 33.4.2.2 Create ORCA-3D for aerial vehicles
- 33.4.2.3 Implement velocity obstacle computation
- 33.4.2.4 Create reciprocal velocity obstacle computation
- 33.4.2.5 Implement HRVO (Hybrid Reciprocal VO)
- 33.4.2.6 Create NH-ORCA (Non-Holonomic ORCA)
- 33.4.2.7 Implement collision cone computation
- 33.4.2.8 Create safe velocity selection algorithm
- 33.4.2.9 Implement deadlock detection and resolution
- 33.4.2.10 Create livelock prevention
- 33.4.2.11 Implement priority-based collision resolution
- 33.4.2.12 Create right-of-way rules system
- 33.4.2.13 Implement safety margin configuration
- 33.4.2.14 Create dynamic safety radius adjustment
- 33.4.2.15 Implement prediction horizon tuning
- 33.4.2.16 Create acceleration-aware collision avoidance
- 33.4.2.17 Implement buffered Voronoi cells
- 33.4.2.18 Create collision probability estimation
- 33.4.2.19 Implement near-miss logging
- 33.4.2.20 Create collision avoidance metrics
33.4.3 Formation Flying#
Coordinated geometric formations for swarm operations.
- 33.4.3.1 Implement Reynolds flocking rules (separation)
- 33.4.3.2 Implement Reynolds flocking rules (alignment)
- 33.4.3.3 Implement Reynolds flocking rules (cohesion)
- 33.4.3.4 Create flocking behavior weighting system
- 33.4.3.5 Implement line formation
- 33.4.3.6 Create V-formation (echelon)
- 33.4.3.7 Implement circle/ring formation
- 33.4.3.8 Create square/grid formation
- 33.4.3.9 Implement triangle formation
- 33.4.3.10 Create custom polygon formation
- 33.4.3.11 Implement 3D formations (sphere, cube, pyramid)
- 33.4.3.12 Create formation scaling (expand/contract)
- 33.4.3.13 Implement formation rotation
- 33.4.3.14 Create formation translation
- 33.4.3.15 Implement smooth formation transitions
- 33.4.3.16 Create formation morphing animations
- 33.4.3.17 Implement position assignment optimization
- 33.4.3.18 Create Hungarian algorithm for assignment
- 33.4.3.19 Implement formation leader election
- 33.4.3.20 Create formation repair (fill gaps)
- 33.4.3.21 Implement formation splitting
- 33.4.3.22 Create formation merging
- 33.4.3.23 Implement terrain-adaptive formations
- 33.4.3.24 Create obstacle-adaptive formations
- 33.4.3.25 Implement formation flight recording/playback
33.4.4 Task Allocation#
Optimal mission distribution across swarm members.
- 33.4.4.1 Implement centralized task allocation
- 33.4.4.2 Create distributed task allocation
- 33.4.4.3 Implement market-based task allocation
- 33.4.4.4 Create CBBA (Consensus-Based Bundle Algorithm)
- 33.4.4.5 Implement SARG framework integration
- 33.4.4.6 Create Hungarian algorithm for assignment
- 33.4.4.7 Implement greedy task assignment
- 33.4.4.8 Create genetic algorithm optimization
- 33.4.4.9 Implement particle swarm optimization
- 33.4.4.10 Create DRL-based task allocation
- 33.4.4.11 Implement task priority system
- 33.4.4.12 Create task dependency handling
- 33.4.4.13 Implement task deadline constraints
- 33.4.4.14 Create task capability matching
- 33.4.4.15 Implement task load balancing
- 33.4.4.16 Create task reassignment on failure
- 33.4.4.17 Implement multi-task coalition formation
- 33.4.4.18 Create task decomposition system
- 33.4.4.19 Implement task completion verification
- 33.4.4.20 Create task allocation metrics
33.4.5 Consensus Algorithms#
Distributed agreement protocols for swarm decision-making.
- 33.4.5.1 Implement average consensus protocol
- 33.4.5.2 Create max/min consensus protocol
- 33.4.5.3 Implement weighted consensus
- 33.4.5.4 Create finite-time consensus
- 33.4.5.5 Implement event-triggered consensus
- 33.4.5.6 Create quantized consensus (limited bandwidth)
- 33.4.5.7 Implement consensus with delays
- 33.4.5.8 Create consensus with packet loss
- 33.4.5.9 Implement Raft consensus algorithm
- 33.4.5.10 Create leader election protocols
- 33.4.5.11 Implement Byzantine fault tolerance
- 33.4.5.12 Create gossip protocols
- 33.4.5.13 Implement distributed estimation
- 33.4.5.14 Create distributed optimization
- 33.4.5.15 Implement federated learning architecture
33.4.6 Inter-Drone Communication#
Mesh networking and message protocols for swarm coordination.
- 33.4.6.1 Implement MAVLink v2 protocol
- 33.4.6.2 Create MAVLink message serialization
- 33.4.6.3 Implement MAVLink message routing
- 33.4.6.4 Create custom MAVLink message definitions
- 33.4.6.5 Implement UDP broadcast communication
- 33.4.6.6 Create UDP multicast communication
- 33.4.6.7 Implement TCP reliable communication
- 33.4.6.8 Create mesh network topology
- 33.4.6.9 Implement ad-hoc network formation
- 33.4.6.10 Create multi-hop message routing
- 33.4.6.11 Implement AODV routing protocol
- 33.4.6.12 Create OLSR routing protocol
- 33.4.6.13 Implement network partition handling
- 33.4.6.14 Create network healing procedures
- 33.4.6.15 Implement bandwidth management
- 33.4.6.16 Create QoS prioritization
- 33.4.6.17 Implement message compression
- 33.4.6.18 Create message authentication
- 33.4.6.19 Implement message encryption
- 33.4.6.20 Create communication range estimation
- 33.4.6.21 Implement RSSI-based positioning
- 33.4.6.22 Create communication quality metrics
- 33.4.6.23 Implement channel hopping (interference mitigation)
- 33.4.6.24 Create ground station relay support
- 33.4.6.25 Implement cellular network bridging
33.5 AI Cinematography#
33.5.1 Shot Planning#
Intelligent camera composition and framing systems.
- 33.5.1.1 Implement rule of thirds grid system
- 33.5.1.2 Create golden ratio composition
- 33.5.1.3 Implement golden spiral framing
- 33.5.1.4 Create center-weighted composition
- 33.5.1.5 Implement dynamic symmetry
- 33.5.1.6 Create leading lines detection
- 33.5.1.7 Implement frame balance analysis
- 33.5.1.8 Create headroom calculation
- 33.5.1.9 Implement lead room calculation
- 33.5.1.10 Create looking room calculation
- 33.5.1.11 Implement shot size classification (ECU, CU, MCU, MS, MLS, LS, ELS)
- 33.5.1.12 Create shot angle classification (eye-level, high, low, dutch)
- 33.5.1.13 Implement shot type detection (static, pan, tilt, dolly, crane)
- 33.5.1.14 Create establishing shot planning
- 33.5.1.15 Implement master shot planning
- 33.5.1.16 Create coverage shot planning
- 33.5.1.17 Implement reaction shot planning
- 33.5.1.18 Create cutaway shot planning
- 33.5.1.19 Implement insert shot planning
- 33.5.1.20 Create over-the-shoulder shot planning
- 33.5.1.21 Implement POV shot planning
- 33.5.1.22 Create two-shot and group shot planning
- 33.5.1.23 Implement 180-degree rule enforcement
- 33.5.1.24 Create 30-degree rule enforcement
- 33.5.1.25 Implement eye-line matching
33.5.2 Subject Tracking#
Real-time person and object following systems.
- 33.5.2.1 Implement YOLO11 object detection integration
- 33.5.2.2 Create YOLO11-Pose person detection
- 33.5.2.3 Implement SSD MobileNet detection
- 33.5.2.4 Create Faster R-CNN detection
- 33.5.2.5 Implement person re-identification (ReID)
- 33.5.2.6 Create face detection integration
- 33.5.2.7 Implement face recognition for subject lock
- 33.5.2.8 Create body detection and tracking
- 33.5.2.9 Implement skeleton-based tracking
- 33.5.2.10 Create multi-object tracking (MOT)
- 33.5.2.11 Implement DeepSORT tracking integration
- 33.5.2.12 Create ByteTrack integration
- 33.5.2.13 Implement OC-SORT integration
- 33.5.2.14 Create SORT tracking integration
- 33.5.2.15 Implement Kalman filter prediction
- 33.5.2.16 Create Hungarian algorithm for track association
- 33.5.2.17 Implement IoU-based track matching
- 33.5.2.18 Create appearance-based track matching
- 33.5.2.19 Implement occlusion handling
- 33.5.2.20 Create track recovery after occlusion
- 33.5.2.21 Implement subject velocity estimation
- 33.5.2.22 Create subject acceleration estimation
- 33.5.2.23 Implement trajectory prediction
- 33.5.2.24 Create multi-subject priority system
- 33.5.2.25 Implement subject handoff between drones
- 33.5.2.26 Create ActiveTrack mode (follow subject)
- 33.5.2.27 Implement Spotlight mode (track but stay stationary)
- 33.5.2.28 Create POI orbit tracking
- 33.5.2.29 Implement gesture-based control
- 33.5.2.30 Create vehicle tracking mode
33.5.3 Trajectory Optimization#
Smooth, cinematic camera path generation.
- 33.5.3.1 Implement B-spline trajectory generation
- 33.5.3.2 Create Bezier curve trajectory generation
- 33.5.3.3 Implement Catmull-Rom spline trajectories
- 33.5.3.4 Create NURBS trajectory generation
- 33.5.3.5 Implement minimum snap trajectory
- 33.5.3.6 Create minimum jerk trajectory
- 33.5.3.7 Implement time-optimal trajectory
- 33.5.3.8 Create cinematically-optimal trajectory
- 33.5.3.9 Implement constant velocity segments
- 33.5.3.10 Create smooth acceleration profiles
- 33.5.3.11 Implement ease-in/ease-out curves
- 33.5.3.12 Create S-curve motion profiles
- 33.5.3.13 Implement trapezoidal velocity profiles
- 33.5.3.14 Create keyframe interpolation
- 33.5.3.15 Implement keyframe timing adjustment
- 33.5.3.16 Create dolly zoom trajectory
- 33.5.3.17 Implement reveal shot trajectory
- 33.5.3.18 Create crane shot trajectory
- 33.5.3.19 Implement orbit shot trajectory
- 33.5.3.20 Create flyby shot trajectory
- 33.5.3.21 Implement cable cam trajectory (linear)
- 33.5.3.22 Create helix/spiral trajectory
- 33.5.3.23 Implement dronie shot trajectory
- 33.5.3.24 Create rocket shot trajectory
- 33.5.3.25 Implement boomerang shot trajectory
- 33.5.3.26 Create asteroid shot trajectory
- 33.5.3.27 Implement collision-aware trajectory refinement
- 33.5.3.28 Create trajectory smoothing post-processing
- 33.5.3.29 Implement trajectory preview visualization
- 33.5.3.30 Create trajectory export formats (JSON, KML, MAVLink)
33.5.4 Multi-Camera Coordination#
Synchronized multi-drone cinematography systems.
- 33.5.4.1 Implement multi-drone shot sequencing
- 33.5.4.2 Create synchronized recording triggers
- 33.5.4.3 Implement timecode synchronization
- 33.5.4.4 Create genlock synchronization support
- 33.5.4.5 Implement MAPF (Multi-Agent Path Finding) for cameras
- 33.5.4.6 Create coverage optimization algorithm
- 33.5.4.7 Implement viewpoint diversity maximization
- 33.5.4.8 Create occlusion avoidance between cameras
- 33.5.4.9 Implement frame overlap calculation
- 33.5.4.10 Create stereo camera pair coordination
- 33.5.4.11 Implement 360-degree coverage coordination
- 33.5.4.12 Create bullet-time effect coordination
- 33.5.4.13 Implement seamless camera handoff
- 33.5.4.14 Create virtual camera from multi-view
- 33.5.4.15 Implement ISO/shutter/aperture synchronization
- 33.5.4.16 Create color matching between cameras
- 33.5.4.17 Implement focal length coordination
- 33.5.4.18 Create director mode (single operator, multiple drones)
- 33.5.4.19 Implement shot list automation
- 33.5.4.20 Create A/B camera role assignment
33.5.5 Gimbal Control#
Precision camera stabilization and movement systems.
- 33.5.5.1 Implement 3-axis gimbal control protocol
- 33.5.5.2 Create gimbal attitude control (roll, pitch, yaw)
- 33.5.5.3 Implement gimbal velocity control
- 33.5.5.4 Create smooth gimbal transitions
- 33.5.5.5 Implement gimbal acceleration limits
- 33.5.5.6 Create follow mode (gimbal follows drone heading)
- 33.5.5.7 Implement FPV mode (gimbal locked to drone)
- 33.5.5.8 Create free mode (independent gimbal control)
- 33.5.5.9 Implement subject tracking gimbal mode
- 33.5.5.10 Create POI lock gimbal mode
- 33.5.5.11 Implement horizon leveling
- 33.5.5.12 Create dutch angle control
- 33.5.5.13 Implement gimbal calibration procedures
- 33.5.5.14 Create gimbal limit configuration
- 33.5.5.15 Implement gimbal deadband configuration
- 33.5.5.16 Create coordinated drone/gimbal movement
- 33.5.5.17 Implement gimbal drift compensation
- 33.5.5.18 Create gimbal vibration filtering
- 33.5.5.19 Implement gimbal motor status monitoring
- 33.5.5.20 Create gimbal telemetry logging
33.5.6 Video Streaming#
Real-time video transmission and distribution.
- 33.5.6.1 Implement H.264 encoding pipeline
- 33.5.6.2 Create H.265/HEVC encoding pipeline
- 33.5.6.3 Implement AV1 encoding support
- 33.5.6.4 Create adaptive bitrate encoding
- 33.5.6.5 Implement resolution scaling
- 33.5.6.6 Create frame rate adaptation
- 33.5.6.7 Implement RTMP streaming output
- 33.5.6.8 Create RTSP server implementation
- 33.5.6.9 Implement WebRTC streaming
- 33.5.6.10 Create SRT (Secure Reliable Transport) support
- 33.5.6.11 Implement HLS output generation
- 33.5.6.12 Create DASH output generation
- 33.5.6.13 Implement low-latency streaming mode (<150ms)
- 33.5.6.14 Create multi-stream output (multiple destinations)
- 33.5.6.15 Implement stream recording (local + stream)
- 33.5.6.16 Create stream overlay system (telemetry HUD)
- 33.5.6.17 Implement stream quality monitoring
- 33.5.6.18 Create packet loss recovery (FEC)
- 33.5.6.19 Implement bandwidth estimation
- 33.5.6.20 Create stream authentication
- 33.5.6.21 Implement stream encryption
- 33.5.6.22 Create multi-drone stream switching
- 33.5.6.23 Implement picture-in-picture composition
- 33.5.6.24 Create stream metadata injection
- 33.5.6.25 Implement Aphrodite streaming integration
33.6 Sensor Integration#
33.6.1 Camera Systems#
RGB, thermal, and specialized imaging sensor integration.
- 33.6.1.1 Implement camera discovery and enumeration
- 33.6.1.2 Create camera capability detection
- 33.6.1.3 Implement resolution configuration
- 33.6.1.4 Create frame rate configuration
- 33.6.1.5 Implement codec selection (H.264, H.265, ProRes)
- 33.6.1.6 Create bitrate configuration
- 33.6.1.7 Implement exposure control (auto, manual)
- 33.6.1.8 Create ISO/gain control
- 33.6.1.9 Implement shutter speed control
- 33.6.1.10 Create aperture control (for variable aperture lenses)
- 33.6.1.11 Implement white balance control
- 33.6.1.12 Create focus control (auto, manual, continuous)
- 33.6.1.13 Implement zoom control
- 33.6.1.14 Create HDR mode support
- 33.6.1.15 Implement D-Log/Log color profile support
- 33.6.1.16 Create RAW capture support
- 33.6.1.17 Implement photo capture (single, burst, interval)
- 33.6.1.18 Create video recording control (start, stop, pause)
- 33.6.1.19 Implement storage management (SD card, internal)
- 33.6.1.20 Create media file download
- 33.6.1.21 Implement live preview stream
- 33.6.1.22 Create histogram display
- 33.6.1.23 Implement zebra pattern overlay
- 33.6.1.24 Create focus peaking overlay
- 33.6.1.25 Implement thermal camera integration (FLIR)
- 33.6.1.26 Create thermal palette selection
- 33.6.1.27 Implement radiometric temperature reading
- 33.6.1.28 Create thermal/visible fusion
- 33.6.1.29 Implement multispectral camera integration
- 33.6.1.30 Create NDVI calculation pipeline
33.6.2 Depth Sensors#
Depth perception and 3D sensing systems.
- 33.6.2.1 Implement Intel RealSense D435/D455 integration
- 33.6.2.2 Create Intel RealSense L515 LiDAR integration
- 33.6.2.3 Implement stereo camera depth calculation
- 33.6.2.4 Create stereo calibration procedures
- 33.6.2.5 Implement disparity map generation
- 33.6.2.6 Create point cloud generation from stereo
- 33.6.2.7 Implement ToF sensor integration
- 33.6.2.8 Create depth confidence filtering
- 33.6.2.9 Implement depth hole filling
- 33.6.2.10 Create depth to RGB alignment
- 33.6.2.11 Implement depth range configuration
- 33.6.2.12 Create depth resolution vs range tradeoff
- 33.6.2.13 Implement depth frame rate configuration
- 33.6.2.14 Create depth-based obstacle detection
- 33.6.2.15 Implement ground plane detection
- 33.6.2.16 Create ceiling detection
- 33.6.2.17 Implement wall detection
- 33.6.2.18 Create depth-based person segmentation
- 33.6.2.19 Implement 3D object bounding boxes
- 33.6.2.20 Create depth streaming protocol
33.6.3 LiDAR Integration#
High-precision laser scanning and mapping.
- 33.6.3.1 Implement Ouster OS0/OS1 LiDAR integration
- 33.6.3.2 Create Velodyne LiDAR integration
- 33.6.3.3 Implement Livox LiDAR integration (DJI ecosystem)
- 33.6.3.4 Create point cloud acquisition pipeline
- 33.6.3.5 Implement point cloud filtering (noise, outliers)
- 33.6.3.6 Create voxel grid downsampling
- 33.6.3.7 Implement point cloud registration (ICP)
- 33.6.3.8 Create point cloud accumulation for mapping
- 33.6.3.9 Implement LOAM (LiDAR Odometry and Mapping)
- 33.6.3.10 Create LeGO-LOAM integration
- 33.6.3.11 Implement LIO-SAM integration
- 33.6.3.12 Create FAST-LIO integration
- 33.6.3.13 Implement ground segmentation
- 33.6.3.14 Create object clustering from point cloud
- 33.6.3.15 Implement bounding box fitting
- 33.6.3.16 Create point cloud colorization with RGB
- 33.6.3.17 Implement LiDAR-camera calibration
- 33.6.3.18 Create LiDAR-IMU calibration
- 33.6.3.19 Implement scan matching algorithms
- 33.6.3.20 Create point cloud compression for streaming
33.6.4 IMU and Orientation#
Inertial measurement and attitude sensing.
- 33.6.4.1 Implement accelerometer data acquisition
- 33.6.4.2 Create gyroscope data acquisition
- 33.6.4.3 Implement magnetometer data acquisition
- 33.6.4.4 Create 9-axis IMU fusion (accel + gyro + mag)
- 33.6.4.5 Implement 6-axis IMU fusion (accel + gyro)
- 33.6.4.6 Create IMU calibration procedures
- 33.6.4.7 Implement accelerometer bias estimation
- 33.6.4.8 Create gyroscope bias estimation
- 33.6.4.9 Implement magnetometer hard/soft iron calibration
- 33.6.4.10 Create temperature compensation
- 33.6.4.11 Implement IMU noise characterization (Allan variance)
- 33.6.4.12 Create IMU data filtering (low-pass)
- 33.6.4.13 Implement coning/sculling compensation
- 33.6.4.14 Create strapdown INS integration
- 33.6.4.15 Implement zero velocity updates (ZUPT)
- 33.6.4.16 Create vibration analysis
- 33.6.4.17 Implement resonance detection
- 33.6.4.18 Create IMU health monitoring
- 33.6.4.19 Implement IMU redundancy management
- 33.6.4.20 Create IMU data logging
33.6.5 Audio Systems#
Microphones, speakers, and acoustic processing.
- 33.6.5.1 Implement microphone array integration
- 33.6.5.2 Create beamforming algorithms
- 33.6.5.3 Implement direction of arrival (DOA) estimation
- 33.6.5.4 Create noise cancellation (propeller noise removal)
- 33.6.5.5 Implement wind noise filtering
- 33.6.5.6 Create acoustic echo cancellation
- 33.6.5.7 Implement voice activity detection
- 33.6.5.8 Create speech enhancement
- 33.6.5.9 Implement audio compression (Opus, AAC)
- 33.6.5.10 Create audio streaming protocol
- 33.6.5.11 Implement speaker output integration
- 33.6.5.12 Create public address system support
- 33.6.5.13 Implement two-way communication
- 33.6.5.14 Create audio recording pipeline
- 33.6.5.15 Implement audio sync with video
- 33.6.5.16 Create sound detection/classification
- 33.6.5.17 Implement gunshot detection
- 33.6.5.18 Create voice command recognition
- 33.6.5.19 Implement audio-based localization
- 33.6.5.20 Create acoustic emergency alerts
33.6.6 Multi-Sensor Fusion#
Comprehensive sensor integration and data fusion.
- 33.6.6.1 Implement sensor time synchronization
- 33.6.6.2 Create hardware timestamp handling
- 33.6.6.3 Implement software timestamp correction
- 33.6.6.4 Create sensor data buffering
- 33.6.6.5 Implement temporal alignment
- 33.6.6.6 Create spatial calibration (extrinsics)
- 33.6.6.7 Implement multi-sensor EKF
- 33.6.6.8 Create multi-sensor UKF
- 33.6.6.9 Implement factor graph fusion
- 33.6.6.10 Create GTSAM integration
- 33.6.6.11 Implement Ceres solver integration
- 33.6.6.12 Create g2o integration
- 33.6.6.13 Implement sensor covariance estimation
- 33.6.6.14 Create outlier rejection
- 33.6.6.15 Implement sensor degradation detection
- 33.6.6.16 Create sensor failover logic
- 33.6.6.17 Implement fusion confidence scoring
- 33.6.6.18 Create sensor health dashboard
- 33.6.6.19 Implement fusion diagnostics
- 33.6.6.20 Create sensor fusion logging
33.7 Pose Estimation Integration#
33.7.1 2D Pose Detection#
Real-time human keypoint detection from drone imagery.
- 33.7.1.1 Implement MediaPipe Pose integration
- 33.7.1.2 Create MediaPipe Pose Landmarker (33 keypoints)
- 33.7.1.3 Implement YOLO11-Pose integration
- 33.7.1.4 Create RTMPose integration (75.8% AP @ 90 FPS)
- 33.7.1.5 Implement OpenPose integration
- 33.7.1.6 Create HRNet pose estimation
- 33.7.1.7 Implement ViTPose integration
- 33.7.1.8 Create pose detector model selection logic
- 33.7.1.9 Implement aerial pose adaptation (FlyPose approach)
- 33.7.1.10 Create altitude-aware pose scaling
- 33.7.1.11 Implement viewpoint-aware pose processing
- 33.7.1.12 Create multi-person pose detection
- 33.7.1.13 Implement pose detection ROI optimization
- 33.7.1.14 Create pose detection confidence thresholding
- 33.7.1.15 Implement keypoint visibility estimation
- 33.7.1.16 Create occluded keypoint handling
- 33.7.1.17 Implement person detection before pose
- 33.7.1.18 Create pose detection batching
- 33.7.1.19 Implement pose detection temporal smoothing
- 33.7.1.20 Create pose keypoint normalization
- 33.7.1.21 Implement COCO keypoint format support
- 33.7.1.22 Create MPII keypoint format support
- 33.7.1.23 Implement custom keypoint format conversion
- 33.7.1.24 Create pose detection benchmark suite
- 33.7.1.25 Implement pose detection A/B testing framework
33.7.2 3D Body Reconstruction#
Full body mesh recovery from 2D observations.
- 33.7.2.1 Implement SMPL body model integration
- 33.7.2.2 Create SMPL-X (hands + face) integration
- 33.7.2.3 Implement SKEL body model integration
- 33.7.2.4 Create HMR2.0 integration
- 33.7.2.5 Implement 4D Humans integration
- 33.7.2.6 Create HSMR integration (10mm+ improvement)
- 33.7.2.7 Implement ROMP integration
- 33.7.2.8 Create PyMAF integration
- 33.7.2.9 Implement body shape estimation (beta parameters)
- 33.7.2.10 Create body pose estimation (theta parameters)
- 33.7.2.11 Implement camera parameter estimation
- 33.7.2.12 Create world coordinate reconstruction
- 33.7.2.13 Implement body mesh rendering
- 33.7.2.14 Create mesh-to-skeleton conversion
- 33.7.2.15 Implement body part segmentation
- 33.7.2.16 Create body measurement extraction
- 33.7.2.17 Implement clothing-aware reconstruction
- 33.7.2.18 Create temporal body tracking
- 33.7.2.19 Implement body motion smoothing
- 33.7.2.20 Create body reconstruction confidence scoring
33.7.3 Multi-View Fusion#
Combining multiple drone viewpoints for enhanced 3D analysis.
- 33.7.3.1 Implement SelfPose3d integration (self-supervised)
- 33.7.3.2 Create voxel-based multi-view fusion
- 33.7.3.3 Implement triangulation-based fusion
- 33.7.3.4 Create epipolar geometry constraints
- 33.7.3.5 Implement multi-view camera calibration
- 33.7.3.6 Create extrinsic parameter estimation
- 33.7.3.7 Implement view synchronization
- 33.7.3.8 Create viewpoint weighting based on confidence
- 33.7.3.9 Implement occlusion-aware view selection
- 33.7.3.10 Create 3D keypoint lifting
- 33.7.3.11 Implement joint-level fusion
- 33.7.3.12 Create person-level fusion
- 33.7.3.13 Implement cross-view ReID
- 33.7.3.14 Create multi-view tracking association
- 33.7.3.15 Implement volumetric reconstruction
- 33.7.3.16 Create point cloud body representation
- 33.7.3.17 Implement multi-view consistency check
- 33.7.3.18 Create view dropout robustness
- 33.7.3.19 Implement dynamic view reweighting
- 33.7.3.20 Create multi-view fusion telemetry
33.7.4 Temporal Tracking#
Consistent pose tracking across video frames.
- 33.7.4.1 Implement pose-based person tracking
- 33.7.4.2 Create skeleton-based ReID
- 33.7.4.3 Implement pose trajectory prediction
- 33.7.4.4 Create pose interpolation for missed detections
- 33.7.4.5 Implement pose extrapolation
- 33.7.4.6 Create temporal pose smoothing (1€ filter)
- 33.7.4.7 Implement Savitzky-Golay pose filtering
- 33.7.4.8 Create Kalman filter for pose tracking
- 33.7.4.9 Implement pose velocity estimation
- 33.7.4.10 Create pose acceleration estimation
- 33.7.4.11 Implement jitter removal algorithms
- 33.7.4.12 Create keypoint confidence temporal fusion
- 33.7.4.13 Implement track ID persistence
- 33.7.4.14 Create track lost detection
- 33.7.4.15 Implement track recovery
- 33.7.4.16 Create multi-person track management
- 33.7.4.17 Implement track merging/splitting
- 33.7.4.18 Create action boundary detection
- 33.7.4.19 Implement pose history buffering
- 33.7.4.20 Create pose playback system
33.7.5 Form Analysis and Metrics#
Biomechanical analysis for fitness, yoga, and sports coaching.
- 33.7.5.1 Implement joint angle calculation (all joints)
- 33.7.5.2 Create joint velocity calculation
- 33.7.5.3 Implement joint acceleration calculation
- 33.7.5.4 Create body segment angles
- 33.7.5.5 Implement center of mass estimation
- 33.7.5.6 Create balance metrics
- 33.7.5.7 Implement symmetry analysis (left vs right)
- 33.7.5.8 Create range of motion tracking
- 33.7.5.9 Implement flexibility assessment
- 33.7.5.10 Create posture analysis (standing, sitting)
- 33.7.5.11 Implement spine alignment analysis
- 33.7.5.12 Create shoulder alignment analysis
- 33.7.5.13 Implement hip alignment analysis
- 33.7.5.14 Create knee alignment analysis (valgus/varus)
- 33.7.5.15 Implement foot placement analysis
- 33.7.5.16 Create gait analysis (3DGait integration)
- 33.7.5.17 Implement stride length measurement
- 33.7.5.18 Create cadence calculation
- 33.7.5.19 Implement ground contact time
- 33.7.5.20 Create vertical oscillation measurement
- 33.7.5.21 Implement arm swing analysis
- 33.7.5.22 Create exercise rep counting
- 33.7.5.23 Implement exercise form scoring
- 33.7.5.24 Create yoga pose recognition and scoring
- 33.7.5.25 Implement workout summary statistics
- 33.7.5.26 Create injury risk indicators
- 33.7.5.27 Implement fatigue detection
- 33.7.5.28 Create real-time form correction prompts
- 33.7.5.29 Implement Aja domain integration
- 33.7.5.30 Create pose analysis API for Lilith
33.8 Hardware Abstraction Layer#
33.8.1 DJI SDK Integration#
Support for DJI consumer and enterprise drones.
- 33.8.1.1 Implement DJI MSDK V5 integration (mobile)
- 33.8.1.2 Create DJI MSDK app key management
- 33.8.1.3 Implement DJI MSDK aircraft connection
- 33.8.1.4 Create DJI MSDK state management
- 33.8.1.5 Implement DJI flight controller commands
- 33.8.1.6 Create DJI virtual stick control mode
- 33.8.1.7 Implement DJI waypoint mission API
- 33.8.1.8 Create DJI timeline mission API
- 33.8.1.9 Implement DJI camera control API
- 33.8.1.10 Create DJI gimbal control API
- 33.8.1.11 Implement DJI live video stream
- 33.8.1.12 Create DJI telemetry subscription
- 33.8.1.13 Implement DJI OSDK integration (onboard)
- 33.8.1.14 Create DJI OSDK ROS wrapper
- 33.8.1.15 Implement DJI OSDK position control
- 33.8.1.16 Create DJI OSDK velocity control
- 33.8.1.17 Implement DJI OSDK attitude control
- 33.8.1.18 Create DJI PSDK integration (payload)
- 33.8.1.19 Implement DJI PSDK custom payload communication
- 33.8.1.20 Create DJI PSDK gimbal interface
- 33.8.1.21 Implement DJI FlightHub integration
- 33.8.1.22 Create DJI Remote ID compliance
- 33.8.1.23 Implement DJI geofencing data sync
- 33.8.1.24 Create DJI firmware version handling
- 33.8.1.25 Implement DJI error code mapping
33.8.2 PX4 Autopilot Integration#
Support for PX4-based custom and commercial drones.
- 33.8.2.1 Implement MAVSDK integration
- 33.8.2.2 Create MAVSDK connection management
- 33.8.2.3 Implement MAVSDK action plugin
- 33.8.2.4 Create MAVSDK telemetry plugin
- 33.8.2.5 Implement MAVSDK offboard plugin
- 33.8.2.6 Create MAVSDK mission plugin
- 33.8.2.7 Implement MAVSDK geofence plugin
- 33.8.2.8 Create MAVSDK param plugin
- 33.8.2.9 Implement MAVSDK camera plugin
- 33.8.2.10 Create MAVSDK gimbal plugin
- 33.8.2.11 Implement PX4 parameter configuration
- 33.8.2.12 Create PX4 flight mode mapping
- 33.8.2.13 Implement PX4 offboard control mode
- 33.8.2.14 Create PX4 position setpoints
- 33.8.2.15 Implement PX4 velocity setpoints
- 33.8.2.16 Create PX4 attitude setpoints
- 33.8.2.17 Implement PX4 actuator control
- 33.8.2.18 Create PX4 sensor calibration interface
- 33.8.2.19 Implement PX4 log downloading
- 33.8.2.20 Create PX4 firmware update support
- 33.8.2.21 Implement uORB message handling
- 33.8.2.22 Create PX4-ROS 2 bridge
- 33.8.2.23 Implement Micro XRCE-DDS integration
- 33.8.2.24 Create PX4 SITL integration
- 33.8.2.25 Implement PX4 HITL support
33.8.3 ArduPilot Integration#
Support for ArduPilot-based platforms.
- 33.8.3.1 Implement DroneKit-Python integration
- 33.8.3.2 Create pymavlink integration
- 33.8.3.3 Implement ArduPilot connection manager
- 33.8.3.4 Create ArduPilot vehicle type detection
- 33.8.3.5 Implement ArduPilot mode mapping
- 33.8.3.6 Create ArduPilot guided mode control
- 33.8.3.7 Implement ArduPilot auto mode missions
- 33.8.3.8 Create ArduPilot simple/super-simple modes
- 33.8.3.9 Implement ArduPilot RTL configuration
- 33.8.3.10 Create ArduPilot failsafe configuration
- 33.8.3.11 Implement ArduPilot parameter management
- 33.8.3.12 Create ArduPilot command execution
- 33.8.3.13 Implement ArduPilot mission upload
- 33.8.3.14 Create ArduPilot mission download
- 33.8.3.15 Implement ArduPilot telemetry parsing
- 33.8.3.16 Create ArduPilot fence support
- 33.8.3.17 Implement ArduPilot rally point support
- 33.8.3.18 Create ArduPilot companion computer interface
- 33.8.3.19 Implement ArduPilot SITL integration
- 33.8.3.20 Create ArduPilot log analysis
33.8.4 MAVLink Protocol#
Core MAVLink communication implementation.
- 33.8.4.1 Implement MAVLink v1 parser
- 33.8.4.2 Create MAVLink v2 parser
- 33.8.4.3 Implement MAVLink message serialization
- 33.8.4.4 Create MAVLink message deserialization
- 33.8.4.5 Implement MAVLink CRC calculation
- 33.8.4.6 Create MAVLink signing support
- 33.8.4.7 Implement MAVLink heartbeat protocol
- 33.8.4.8 Create MAVLink system/component ID management
- 33.8.4.9 Implement MAVLink message routing
- 33.8.4.10 Create MAVLink UDP transport
- 33.8.4.11 Implement MAVLink TCP transport
- 33.8.4.12 Create MAVLink serial transport
- 33.8.4.13 Implement MAVLink command protocol (COMMAND_LONG)
- 33.8.4.14 Create MAVLink command acknowledgment handling
- 33.8.4.15 Implement MAVLink mission protocol
- 33.8.4.16 Create MAVLink parameter protocol
- 33.8.4.17 Implement MAVLink file transfer protocol (FTP)
- 33.8.4.18 Create MAVLink logging protocol
- 33.8.4.19 Implement MAVLink camera protocol
- 33.8.4.20 Create MAVLink gimbal protocol (v2)
- 33.8.4.21 Implement common message set
- 33.8.4.22 Create ardupilotmega message set
- 33.8.4.23 Implement custom message definitions
- 33.8.4.24 Create MAVLink microservices
- 33.8.4.25 Implement MAVLink message rate configuration
33.8.5 Generic Hardware Interface#
Abstraction layer for hardware-agnostic drone control.
- 33.8.5.1 Create
IDroneConnectioninterface - 33.8.5.2 Create
IFlightControllerinterface - 33.8.5.3 Create
INavigationinterface - 33.8.5.4 Create
IMissionManagerinterface - 33.8.5.5 Create
ICameraControllerinterface - 33.8.5.6 Create
IGimbalControllerinterface - 33.8.5.7 Create
ITelemetryProviderinterface - 33.8.5.8 Create
IBatteryManagerinterface - 33.8.5.9 Create
ISafetySysteminterface - 33.8.5.10 Create
IGeofenceManagerinterface - 33.8.5.11 Implement drone connection factory
- 33.8.5.12 Create hardware capability discovery
- 33.8.5.13 Implement feature flag system
- 33.8.5.14 Create hardware abstraction adapters
- 33.8.5.15 Implement command translation layer
- 33.8.5.16 Create telemetry normalization layer
- 33.8.5.17 Implement error code mapping
- 33.8.5.18 Create hardware mock implementations
- 33.8.5.19 Implement hardware simulation mode
- 33.8.5.20 Create hardware diagnostics interface
33.9 Edge AI Processing#
33.9.1 Model Inference Runtime#
On-device AI inference for real-time processing.
- 33.9.1.1 Implement ONNX Runtime integration
- 33.9.1.2 Create TensorRT inference engine
- 33.9.1.3 Implement TFLite inference engine
- 33.9.1.4 Create OpenVINO inference engine
- 33.9.1.5 Implement CoreML inference (macOS/iOS)
- 33.9.1.6 Create inference engine abstraction layer
- 33.9.1.7 Implement model loading and caching
- 33.9.1.8 Create input preprocessing pipeline
- 33.9.1.9 Implement output postprocessing pipeline
- 33.9.1.10 Create batch inference support
- 33.9.1.11 Implement async inference queuing
- 33.9.1.12 Create inference latency monitoring
- 33.9.1.13 Implement GPU memory management
- 33.9.1.14 Create multi-model concurrent inference
- 33.9.1.15 Implement model warm-up procedures
- 33.9.1.16 Create inference fallback (GPU → CPU)
- 33.9.1.17 Implement dynamic batching
- 33.9.1.18 Create inference profiling tools
- 33.9.1.19 Implement power-aware inference scheduling
- 33.9.1.20 Create inference telemetry logging
33.9.2 Model Optimization#
Techniques for efficient edge deployment.
- 33.9.2.1 Implement INT8 quantization (post-training)
- 33.9.2.2 Create INT8 quantization (quantization-aware training)
- 33.9.2.3 Implement FP16 quantization
- 33.9.2.4 Create mixed-precision inference
- 33.9.2.5 Implement weight pruning (structured)
- 33.9.2.6 Create weight pruning (unstructured)
- 33.9.2.7 Implement knowledge distillation pipeline
- 33.9.2.8 Create model architecture search (NAS)
- 33.9.2.9 Implement layer fusion optimization
- 33.9.2.10 Create graph optimization
- 33.9.2.11 Implement constant folding
- 33.9.2.12 Create dead code elimination
- 33.9.2.13 Implement operator fusion
- 33.9.2.14 Create memory layout optimization
- 33.9.2.15 Implement model benchmarking suite
- 33.9.2.16 Create accuracy vs latency tradeoff analysis
- 33.9.2.17 Implement calibration dataset management
- 33.9.2.18 Create quantization error analysis
- 33.9.2.19 Implement optimized model validation
- 33.9.2.20 Create optimization recommendation engine
33.9.3 Pre-trained Models#
Curated collection of optimized models for drone applications.
- 33.9.3.1 Create YOLO11n/s/m detection models (optimized)
- 33.9.3.2 Create YOLO11-Pose models (optimized)
- 33.9.3.3 Create RTMPose-t/s/m models (optimized)
- 33.9.3.4 Create MediaPipe Pose models
- 33.9.3.5 Create MobileNet-SSD detection models
- 33.9.3.6 Create face detection models (BlazeFace)
- 33.9.3.7 Create face recognition models (ArcFace-lite)
- 33.9.3.8 Create person ReID models
- 33.9.3.9 Create depth estimation models (MiDaS-lite)
- 33.9.3.10 Create segmentation models (DeepLabV3-lite)
- 33.9.3.11 Create optical flow models (RAFT-lite)
- 33.9.3.12 Create scene classification models
- 33.9.3.13 Create obstacle detection models
- 33.9.3.14 Create landing zone detection models
- 33.9.3.15 Create hand gesture models
- 33.9.3.16 Create action recognition models
- 33.9.3.17 Create vehicle detection models
- 33.9.3.18 Create animal detection models
- 33.9.3.19 Create text detection models (for signs)
- 33.9.3.20 Create model version management system
33.9.4 Edge Deployment#
Tools for deploying models to edge devices.
- 33.9.4.1 Implement Jetson Orin deployment pipeline
- 33.9.4.2 Create Jetson Xavier deployment pipeline
- 33.9.4.3 Implement Jetson Nano deployment pipeline
- 33.9.4.4 Create Qualcomm SNPE deployment
- 33.9.4.5 Implement ModalAI VOXL deployment
- 33.9.4.6 Create Raspberry Pi deployment
- 33.9.4.7 Implement Google Coral deployment
- 33.9.4.8 Create Intel NCS2 deployment
- 33.9.4.9 Implement containerized edge deployment (Docker)
- 33.9.4.10 Create OTA model update system
- 33.9.4.11 Implement A/B model deployment
- 33.9.4.12 Create model rollback mechanism
- 33.9.4.13 Implement edge device fleet management
- 33.9.4.14 Create model performance monitoring
- 33.9.4.15 Implement thermal throttling handling
- 33.9.4.16 Create power consumption optimization
- 33.9.4.17 Implement edge-cloud hybrid inference
- 33.9.4.18 Create model download and caching
- 33.9.4.19 Implement secure model encryption
- 33.9.4.20 Create deployment validation testing
33.10 Safety Systems#
33.10.1 Geofencing#
Virtual boundary enforcement for safe operation.
- 33.10.1.1 Implement polygon geofence definition
- 33.10.1.2 Create circular geofence definition
- 33.10.1.3 Implement cylindrical 3D geofence (with altitude)
- 33.10.1.4 Create complex polygon geofence (with holes)
- 33.10.1.5 Implement geofence upload to drone
- 33.10.1.6 Create real-time geofence checking
- 33.10.1.7 Implement geofence breach detection
- 33.10.1.8 Create geofence warning zone (soft boundary)
- 33.10.1.9 Implement geofence hard boundary enforcement
- 33.10.1.10 Create geofence breach actions (stop, RTH, land)
- 33.10.1.11 Implement altitude ceiling enforcement
- 33.10.1.12 Create altitude floor enforcement
- 33.10.1.13 Implement no-fly zone database integration
- 33.10.1.14 Create airport proximity detection
- 33.10.1.15 Implement heliport proximity detection
- 33.10.1.16 Create stadium/arena TFR support
- 33.10.1.17 Implement temporary flight restriction (TFR) updates
- 33.10.1.18 Create LAANC authorization integration
- 33.10.1.19 Implement dynamic geofence updates
- 33.10.1.20 Create geofence visualization for operators
33.10.2 Emergency Procedures#
Failsafe and emergency response systems.
- 33.10.2.1 Implement low battery failsafe
- 33.10.2.2 Create critical battery failsafe
- 33.10.2.3 Implement GPS loss failsafe
- 33.10.2.4 Create communication loss failsafe
- 33.10.2.5 Implement motor failure detection
- 33.10.2.6 Create motor failure response (controlled descent)
- 33.10.2.7 Implement ESC failure detection
- 33.10.2.8 Create propeller damage detection
- 33.10.2.9 Implement IMU failure detection
- 33.10.2.10 Create sensor redundancy management
- 33.10.2.11 Implement return-to-home procedure
- 33.10.2.12 Create smart RTH (obstacle-aware)
- 33.10.2.13 Implement auto-land procedure
- 33.10.2.14 Create emergency stop (motor kill)
- 33.10.2.15 Implement parachute deployment trigger
- 33.10.2.16 Create emergency descent mode
- 33.10.2.17 Implement crash detection
- 33.10.2.18 Create post-crash procedures
- 33.10.2.19 Implement emergency beacon activation
- 33.10.2.20 Create emergency notification system
33.10.3 Human-Aware Navigation#
Social navigation for safe operation around people.
- 33.10.3.1 Implement human detection system
- 33.10.3.2 Create human tracking and prediction
- 33.10.3.3 Implement personal space modeling
- 33.10.3.4 Create social force model implementation
- 33.10.3.5 Implement crowd density estimation
- 33.10.3.6 Create safe passing distance enforcement
- 33.10.3.7 Implement approach angle optimization
- 33.10.3.8 Create velocity reduction near humans
- 33.10.3.9 Implement altitude adjustment near people
- 33.10.3.10 Create human-aware path planning
- 33.10.3.11 Implement child detection and extra caution
- 33.10.3.12 Create pet/animal avoidance
- 33.10.3.13 Implement gesture-based stop command
- 33.10.3.14 Create voice command emergency stop
- 33.10.3.15 Implement visual/audio warnings to bystanders
- 33.10.3.16 Create consent-based approach mode
- 33.10.3.17 Implement privacy-aware operation
- 33.10.3.18 Create no-record zones
- 33.10.3.19 Implement face blurring when required
- 33.10.3.20 Create human safety metrics logging
33.10.4 Regulatory Compliance#
Tools for meeting aviation regulations.
- 33.10.4.1 Implement Remote ID broadcast (FAA)
- 33.10.4.2 Create Remote ID receiver
- 33.10.4.3 Implement ADS-B receiver integration
- 33.10.4.4 Create detect-and-avoid (DAA) system
- 33.10.4.5 Implement aircraft proximity alerts
- 33.10.4.6 Create NOTAM (Notice to Airmen) integration
- 33.10.4.7 Implement flight logging for compliance
- 33.10.4.8 Create pilot certification tracking
- 33.10.4.9 Implement aircraft registration management
- 33.10.4.10 Create pre-flight checklist system
- 33.10.4.11 Implement Part 107 compliance checks
- 33.10.4.12 Create EASA compliance checks
- 33.10.4.13 Implement weight class management (<250g, etc.)
- 33.10.4.14 Create VLOS (Visual Line of Sight) enforcement
- 33.10.4.15 Implement BVLOS waiver support
- 33.10.4.16 Create night operations compliance
- 33.10.4.17 Implement operations over people compliance
- 33.10.4.18 Create insurance tracking
- 33.10.4.19 Implement audit trail generation
- 33.10.4.20 Create compliance report generation
33.11 Telemetry and Logging#
33.11.1 Data Collection#
Real-time drone data acquisition and aggregation.
- 33.11.1.1 Implement high-frequency telemetry collection (100+ Hz)
- 33.11.1.2 Create configurable telemetry rates
- 33.11.1.3 Implement position telemetry (GPS, local)
- 33.11.1.4 Create velocity telemetry
- 33.11.1.5 Implement acceleration telemetry
- 33.11.1.6 Create attitude telemetry (orientation)
- 33.11.1.7 Implement angular velocity telemetry
- 33.11.1.8 Create battery telemetry (voltage, current, capacity)
- 33.11.1.9 Implement motor/ESC telemetry (RPM, current, temp)
- 33.11.1.10 Create RC input telemetry
- 33.11.1.11 Implement flight mode telemetry
- 33.11.1.12 Create mission progress telemetry
- 33.11.1.13 Implement sensor health telemetry
- 33.11.1.14 Create GPS quality telemetry (satellites, DOP)
- 33.11.1.15 Implement vibration telemetry
- 33.11.1.16 Create environmental telemetry (temp, pressure, humidity)
- 33.11.1.17 Implement wind estimation telemetry
- 33.11.1.18 Create obstacle detection telemetry
- 33.11.1.19 Implement gimbal telemetry
- 33.11.1.20 Create camera telemetry
33.11.2 Real-Time Streaming#
Live telemetry broadcast and distribution.
- 33.11.2.1 Implement telemetry WebSocket server
- 33.11.2.2 Create telemetry MQTT publisher
- 33.11.2.3 Implement telemetry Redis Streams publisher
- 33.11.2.4 Create telemetry gRPC streaming
- 33.11.2.5 Implement telemetry rate limiting
- 33.11.2.6 Create telemetry downsampling
- 33.11.2.7 Implement telemetry compression
- 33.11.2.8 Create telemetry delta encoding
- 33.11.2.9 Implement multi-drone telemetry aggregation
- 33.11.2.10 Create swarm telemetry summary
- 33.11.2.11 Implement selective telemetry subscription
- 33.11.2.12 Create telemetry filtering by consumer
- 33.11.2.13 Implement telemetry replay from buffer
- 33.11.2.14 Create telemetry visualization integration
- 33.11.2.15 Implement Bellona/Unreal telemetry bridge
33.11.3 Flight Logging#
Persistent flight data recording.
- 33.11.3.1 Implement binary flight log format
- 33.11.3.2 Create JSON flight log format
- 33.11.3.3 Implement PX4 ULog compatibility
- 33.11.3.4 Create ArduPilot BIN log compatibility
- 33.11.3.5 Implement DJI flight log parsing
- 33.11.3.6 Create log rotation and management
- 33.11.3.7 Implement log compression
- 33.11.3.8 Create log encryption
- 33.11.3.9 Implement log upload to cloud
- 33.11.3.10 Create log download from drone
- 33.11.3.11 Implement log integrity verification
- 33.11.3.12 Create log metadata indexing
- 33.11.3.13 Implement log search and query
- 33.11.3.14 Create log export formats (CSV, KML, GPX)
- 33.11.3.15 Implement log retention policies
33.11.4 Post-Flight Analysis#
Tools for analyzing completed flights.
- 33.11.4.1 Implement flight path visualization
- 33.11.4.2 Create 3D flight replay
- 33.11.4.3 Implement telemetry charting (time series)
- 33.11.4.4 Create multi-signal correlation analysis
- 33.11.4.5 Implement anomaly detection in flight data
- 33.11.4.6 Create vibration analysis tools
- 33.11.4.7 Implement motor health analysis
- 33.11.4.8 Create battery health analysis
- 33.11.4.9 Implement flight efficiency metrics
- 33.11.4.10 Create mission completion analysis
- 33.11.4.11 Implement incident reconstruction
- 33.11.4.12 Create near-miss analysis
- 33.11.4.13 Implement flight statistics aggregation
- 33.11.4.14 Create fleet-wide analytics
- 33.11.4.15 Implement predictive maintenance alerts
- 33.11.4.16 Create flight report generation
- 33.11.4.17 Implement regulatory audit reports
- 33.11.4.18 Create training/certification reports
- 33.11.4.19 Implement comparison analysis (flight vs. planned)
- 33.11.4.20 Create Sophia integration for learning
33.12 Simulation#
33.12.1 Gazebo Integration#
High-fidelity robotics simulation.
- 33.12.1.1 Implement Gazebo Classic integration
- 33.12.1.2 Create Gazebo Fortress/Garden integration
- 33.12.1.3 Implement PX4 SITL + Gazebo bridge
- 33.12.1.4 Create ArduPilot SITL + Gazebo bridge
- 33.12.1.5 Implement multi-drone spawning
- 33.12.1.6 Create drone model library (quadrotor, hexarotor)
- 33.12.1.7 Implement sensor plugins (camera, IMU, GPS, LiDAR)
- 33.12.1.8 Create environment models (indoor, outdoor)
- 33.12.1.9 Implement physics parameter tuning
- 33.12.1.10 Create wind plugin
- 33.12.1.11 Implement terrain modeling
- 33.12.1.12 Create obstacle course environments
- 33.12.1.13 Implement human actor models
- 33.12.1.14 Create vehicle traffic simulation
- 33.12.1.15 Implement lighting conditions simulation
- 33.12.1.16 Create weather effects simulation
- 33.12.1.17 Implement camera image simulation
- 33.12.1.18 Create depth sensor simulation
- 33.12.1.19 Implement sensor noise models
- 33.12.1.20 Create Gazebo ROS 2 integration
33.12.2 AirSim Integration#
Microsoft AirSim for AI training and testing.
- 33.12.2.1 Implement AirSim Python client
- 33.12.2.2 Create AirSim C++ client
- 33.12.2.3 Implement multi-vehicle simulation
- 33.12.2.4 Create custom vehicle configurations
- 33.12.2.5 Implement API control mode
- 33.12.2.6 Create computer vision mode
- 33.12.2.7 Implement camera image capture
- 33.12.2.8 Create depth image capture
- 33.12.2.9 Implement segmentation image capture
- 33.12.2.10 Create LiDAR simulation
- 33.12.2.11 Implement Unreal Engine environment integration
- 33.12.2.12 Create custom environment loading
- 33.12.2.13 Implement weather API
- 33.12.2.14 Create time of day API
- 33.12.2.15 Implement collision detection
- 33.12.2.16 Create reinforcement learning interface
- 33.12.2.17 Implement data collection for ML
- 33.12.2.18 Create domain randomization
- 33.12.2.19 Implement sim-to-real transfer utilities
- 33.12.2.20 Create AirSim ROS 2 wrapper
33.12.3 jMAVSim Integration#
Lightweight Java-based simulation.
- 33.12.3.1 Implement jMAVSim launcher
- 33.12.3.2 Create jMAVSim configuration management
- 33.12.3.3 Implement PX4 SITL connection
- 33.12.3.4 Create multi-vehicle support
- 33.12.3.5 Implement headless mode
- 33.12.3.6 Create lockstep simulation
- 33.12.3.7 Implement wind simulation
- 33.12.3.8 Create GPS simulation parameters
- 33.12.3.9 Implement sensor failure injection
- 33.12.3.10 Create quick test scenarios
33.12.4 Physics Simulation#
Custom physics engine for drone dynamics.
- 33.12.4.1 Implement 6-DOF physics engine
- 33.12.4.2 Create numerical integration (RK4)
- 33.12.4.3 Implement variable timestep support
- 33.12.4.4 Create aerodynamic force calculation
- 33.12.4.5 Implement propeller aerodynamics
- 33.12.4.6 Create motor dynamics simulation
- 33.12.4.7 Implement battery discharge simulation
- 33.12.4.8 Create sensor noise simulation
- 33.12.4.9 Implement GPS simulation (with delays, errors)
- 33.12.4.10 Create IMU simulation (bias, noise, drift)
- 33.12.4.11 Implement barometer simulation
- 33.12.4.12 Create magnetometer simulation (interference)
- 33.12.4.13 Implement ground effect simulation
- 33.12.4.14 Create collision response
- 33.12.4.15 Implement wind gust simulation
- 33.12.4.16 Create turbulence model (Dryden)
- 33.12.4.17 Implement thermal updraft simulation
- 33.12.4.18 Create real-time visualization
- 33.12.4.19 Implement replay from flight logs
- 33.12.4.20 Create physics validation suite
33.13 Client SDK#
33.13.1 TypeScript SDK Core#
TypeScript/JavaScript SDK for Oya integration.
- 33.13.1.1 Create SDK package structure (@oya/client)
- 33.13.1.2 Implement connection management
- 33.13.1.3 Create authentication handling
- 33.13.1.4 Implement WebSocket client
- 33.13.1.5 Create gRPC client (gRPC-web)
- 33.13.1.6 Implement REST API client
- 33.13.1.7 Create request/response types
- 33.13.1.8 Implement error handling and mapping
- 33.13.1.9 Create retry logic with backoff
- 33.13.1.10 Implement connection pooling
- 33.13.1.11 Create event emitter for telemetry
- 33.13.1.12 Implement subscription management
- 33.13.1.13 Create SDK configuration options
- 33.13.1.14 Implement logging integration
- 33.13.1.15 Create SDK versioning strategy
33.13.2 Drone Control API#
High-level drone control abstractions.
- 33.13.2.1 Implement drone discovery API
- 33.13.2.2 Create drone connection API
- 33.13.2.3 Implement takeoff command
- 33.13.2.4 Create land command
- 33.13.2.5 Implement RTH (return-to-home) command
- 33.13.2.6 Create emergency stop command
- 33.13.2.7 Implement goto position command
- 33.13.2.8 Create velocity control API
- 33.13.2.9 Implement attitude control API
- 33.13.2.10 Create orbit command
- 33.13.2.11 Implement follow-me API
- 33.13.2.12 Create waypoint mission API
- 33.13.2.13 Implement mission upload/download
- 33.13.2.14 Create mission start/pause/resume
- 33.13.2.15 Implement geofence management API
- 33.13.2.16 Create flight mode control API
- 33.13.2.17 Implement parameter read/write API
- 33.13.2.18 Create calibration command API
- 33.13.2.19 Implement firmware update API
- 33.13.2.20 Create drone status subscription
33.13.3 Camera and Gimbal API#
Media capture and gimbal control.
- 33.13.3.1 Implement camera discovery
- 33.13.3.2 Create camera settings API
- 33.13.3.3 Implement photo capture API
- 33.13.3.4 Create video recording API
- 33.13.3.5 Implement live stream API
- 33.13.3.6 Create media download API
- 33.13.3.7 Implement storage management API
- 33.13.3.8 Create gimbal control API
- 33.13.3.9 Implement gimbal mode selection
- 33.13.3.10 Create POI tracking API
- 33.13.3.11 Implement subject tracking API
- 33.13.3.12 Create zoom control API
- 33.13.3.13 Implement focus control API
- 33.13.3.14 Create exposure control API
- 33.13.3.15 Implement white balance API
33.13.4 Swarm API#
Multi-drone coordination interface.
- 33.13.4.1 Implement swarm creation API
- 33.13.4.2 Create drone enrollment API
- 33.13.4.3 Implement swarm status API
- 33.13.4.4 Create synchronized takeoff API
- 33.13.4.5 Implement synchronized landing API
- 33.13.4.6 Create formation control API
- 33.13.4.7 Implement formation templates
- 33.13.4.8 Create swarm mission API
- 33.13.4.9 Implement task assignment API
- 33.13.4.10 Create swarm telemetry subscription
- 33.13.4.11 Implement swarm emergency stop
- 33.13.4.12 Create individual drone control within swarm
- 33.13.4.13 Implement swarm scaling API
- 33.13.4.14 Create swarm health monitoring
- 33.13.4.15 Implement swarm event notifications
33.13.5 Telemetry API#
Real-time data subscription interface.
- 33.13.5.1 Implement telemetry subscription API
- 33.13.5.2 Create selective field subscription
- 33.13.5.3 Implement rate configuration
- 33.13.5.4 Create telemetry buffering
- 33.13.5.5 Implement telemetry callbacks
- 33.13.5.6 Create telemetry stream iterator
- 33.13.5.7 Implement historical telemetry query
- 33.13.5.8 Create telemetry export API
- 33.13.5.9 Implement telemetry aggregation API
- 33.13.5.10 Create custom telemetry fields
33.14 Database#
33.14.1 Schema Design#
Database schema for drone operations data.
- 33.14.1.1 Create drones table (registration, capabilities)
- 33.14.1.2 Create swarms table (configuration, membership)
- 33.14.1.3 Create missions table (definition, status)
- 33.14.1.4 Create waypoints table (mission waypoints)
- 33.14.1.5 Create flights table (flight sessions)
- 33.14.1.6 Create telemetry_samples table (time-series)
- 33.14.1.7 Create events table (system events, alerts)
- 33.14.1.8 Create geofences table (boundary definitions)
- 33.14.1.9 Create media table (photos, videos metadata)
- 33.14.1.10 Create operators table (pilot information)
- 33.14.1.11 Create maintenance_logs table
- 33.14.1.12 Create incidents table (anomalies, near-misses)
- 33.14.1.13 Create calibration_records table
- 33.14.1.14 Create firmware_versions table
- 33.14.1.15 Create settings table (per-drone configuration)
33.14.2 Time-Series Storage#
Efficient telemetry data storage.
- 33.14.2.1 Implement TimescaleDB hypertable for telemetry
- 33.14.2.2 Create compression policies
- 33.14.2.3 Implement retention policies
- 33.14.2.4 Create continuous aggregates (1min, 1hr, 1day)
- 33.14.2.5 Implement telemetry ingestion pipeline
- 33.14.2.6 Create batch insert optimization
- 33.14.2.7 Implement query optimization for time ranges
- 33.14.2.8 Create downsampling queries
- 33.14.2.9 Implement telemetry data export
- 33.14.2.10 Create telemetry backup procedures
33.14.3 Spatial Data#
Geographic and 3D spatial data storage.
- 33.14.3.1 Implement PostGIS integration
- 33.14.3.2 Create spatial indexes for flight paths
- 33.14.3.3 Implement trajectory storage (LineStringZ)
- 33.14.3.4 Create geofence storage (Polygon)
- 33.14.3.5 Implement spatial queries (within, intersects)
- 33.14.3.6 Create 3D point cloud storage
- 33.14.3.7 Implement map tile storage
- 33.14.3.8 Create terrain elevation data storage
- 33.14.3.9 Implement obstacle database
- 33.14.3.10 Create spatial analytics queries
33.14.4 Data Access Layer#
Repository pattern and query interfaces.
- 33.14.4.1 Create DroneRepository
- 33.14.4.2 Create SwarmRepository
- 33.14.4.3 Create MissionRepository
- 33.14.4.4 Create FlightRepository
- 33.14.4.5 Create TelemetryRepository
- 33.14.4.6 Create EventRepository
- 33.14.4.7 Create GeofenceRepository
- 33.14.4.8 Create MediaRepository
- 33.14.4.9 Implement transaction management
- 33.14.4.10 Create query builders
- 33.14.4.11 Implement pagination helpers
- 33.14.4.12 Create bulk operations
- 33.14.4.13 Implement caching layer
- 33.14.4.14 Create database migrations
- 33.14.4.15 Implement seed data
33.15 Domain Integrations#
33.15.1 Aja Integration (Motion Intelligence)#
Connecting Oya with Aja for pose estimation and motion capture.
- 33.15.1.1 Implement Aja pose estimation API client
- 33.15.1.2 Create video frame streaming to Aja
- 33.15.1.3 Implement pose data reception from Aja
- 33.15.1.4 Create multi-view fusion coordination
- 33.15.1.5 Implement skeleton data normalization
- 33.15.1.6 Create motion capture session management
- 33.15.1.7 Implement calibration data exchange
- 33.15.1.8 Create synchronized recording with Aja
- 33.15.1.9 Implement pose-based drone positioning
- 33.15.1.10 Create form analysis feedback loop
- 33.15.1.11 Implement workout session integration
- 33.15.1.12 Create yoga pose tracking integration
- 33.15.1.13 Implement sports analysis integration
- 33.15.1.14 Create gait analysis integration
- 33.15.1.15 Implement Aja event subscription
33.15.2 Aphrodite Integration (Live Streaming)#
Multi-angle performer capture for live streaming.
- 33.15.2.1 Implement Aphrodite stream registration
- 33.15.2.2 Create multi-drone stream aggregation
- 33.15.2.3 Implement stream source switching
- 33.15.2.4 Create picture-in-picture coordination
- 33.15.2.5 Implement performer tracking mode
- 33.15.2.6 Create audience engagement drone responses
- 33.15.2.7 Implement tip-triggered drone actions
- 33.15.2.8 Create interactive drone commands
- 33.15.2.9 Implement stream metadata injection
- 33.15.2.10 Create broadcast-safe operation modes
- 33.15.2.11 Implement studio environment presets
- 33.15.2.12 Create outdoor streaming optimization
- 33.15.2.13 Implement low-latency stream mode
- 33.15.2.14 Create multi-platform output
- 33.15.2.15 Implement Aphrodite event subscription
33.15.3 Lilith Integration (Wellness Platform)#
Drone support for meditation, yoga, and fitness.
- 33.15.3.1 Implement Lilith session integration
- 33.15.3.2 Create yoga form checking mode
- 33.15.3.3 Implement workout recording mode
- 33.15.3.4 Create meditation flyover mode
- 33.15.3.5 Implement mirror drone mode (display screen)
- 33.15.3.6 Create form correction feedback
- 33.15.3.7 Implement rep counting integration
- 33.15.3.8 Create calorie burn correlation
- 33.15.3.9 Implement workout summary generation
- 33.15.3.10 Create personalized drone positioning
- 33.15.3.11 Implement voice coaching integration
- 33.15.3.12 Create ambient lighting coordination
- 33.15.3.13 Implement music synchronization
- 33.15.3.14 Create wellness metrics streaming
- 33.15.3.15 Implement Lilith event subscription
33.15.4 Yemaya Integration (Creative Studio)#
Cinematic production and content creation.
- 33.15.4.1 Implement Yemaya project integration
- 33.15.4.2 Create shot list import
- 33.15.4.3 Implement cinematic path generation
- 33.15.4.4 Create director mode interface
- 33.15.4.5 Implement multi-camera orchestration
- 33.15.4.6 Create virtual production support
- 33.15.4.7 Implement Unreal Engine tracking data
- 33.15.4.8 Create motion reference capture
- 33.15.4.9 Implement timeline integration
- 33.15.4.10 Create proxy footage generation
- 33.15.4.11 Implement media asset management
- 33.15.4.12 Create production logging
- 33.15.4.13 Implement camera preset library
- 33.15.4.14 Create shot matching between flights
- 33.15.4.15 Implement Yemaya event subscription
33.15.5 Isis Integration (Generative Factory)#
AI-powered content enhancement.
- 33.15.5.1 Implement raw footage upload to Isis
- 33.15.5.2 Create AI enhancement pipeline trigger
- 33.15.5.3 Implement color grading automation
- 33.15.5.4 Create stabilization post-processing
- 33.15.5.5 Implement thumbnail generation
- 33.15.5.6 Create highlight detection
- 33.15.5.7 Implement auto-edit suggestions
- 33.15.5.8 Create content-aware cropping
- 33.15.5.9 Implement object removal requests
- 33.15.5.10 Create style transfer requests
- 33.15.5.11 Implement upscaling requests
- 33.15.5.12 Create frame interpolation requests
- 33.15.5.13 Implement slow-motion generation
- 33.15.5.14 Create timelapse generation
- 33.15.5.15 Implement Isis event subscription
33.15.6 Sophia Integration (Knowledge & Learning)#
Machine learning and recommendation systems.
- 33.15.6.1 Implement flight data upload to Sophia
- 33.15.6.2 Create flight pattern learning
- 33.15.6.3 Implement optimal path recommendations
- 33.15.6.4 Create battery usage predictions
- 33.15.6.5 Implement maintenance predictions
- 33.15.6.6 Create weather impact analysis
- 33.15.6.7 Implement shot success prediction
- 33.15.6.8 Create operator skill assessment
- 33.15.6.9 Implement mission optimization suggestions
- 33.15.6.10 Create swarm behavior optimization
- 33.15.6.11 Implement anomaly detection training
- 33.15.6.12 Create personalized automation
- 33.15.6.13 Implement content recommendation
- 33.15.6.14 Create knowledge base queries
- 33.15.6.15 Implement Sophia event subscription
33.15.7 Bellona Integration (Engine Bridges)#
Real-time visualization and game engine support.
- 33.15.7.1 Implement Unreal Engine position streaming
- 33.15.7.2 Create Unity position streaming
- 33.15.7.3 Implement real-time drone visualization
- 33.15.7.4 Create virtual camera matching
- 33.15.7.5 Implement LED wall coordination
- 33.15.7.6 Create motion capture relay
- 33.15.7.7 Implement physics synchronization
- 33.15.7.8 Create replay visualization
- 33.15.7.9 Implement multi-drone scene rendering
- 33.15.7.10 Create telemetry overlay rendering
- 33.15.7.11 Implement flight path visualization
- 33.15.7.12 Create obstacle visualization
- 33.15.7.13 Implement geofence visualization
- 33.15.7.14 Create mission planning visualization
- 33.15.7.15 Implement Bellona event subscription
33.16 Testing and Quality Assurance#
33.16.1 Unit Testing#
Comprehensive unit test coverage.
- 33.16.1.1 Create test framework setup (Vitest)
- 33.16.1.2 Implement core types unit tests
- 33.16.1.3 Create utility functions unit tests
- 33.16.1.4 Implement coordinate transformation tests
- 33.16.1.5 Create filter algorithm tests
- 33.16.1.6 Implement PID controller tests
- 33.16.1.7 Create path planning algorithm tests
- 33.16.1.8 Implement collision avoidance tests
- 33.16.1.9 Create ORCA algorithm tests
- 33.16.1.10 Implement formation algorithm tests
- 33.16.1.11 Create MAVLink parser tests
- 33.16.1.12 Implement telemetry processing tests
- 33.16.1.13 Create client SDK tests
- 33.16.1.14 Implement repository tests
- 33.16.1.15 Create minimum 80% code coverage
33.16.2 Integration Testing#
End-to-end integration test suite.
- 33.16.2.1 Create SITL integration test framework
- 33.16.2.2 Implement PX4 SITL integration tests
- 33.16.2.3 Create ArduPilot SITL integration tests
- 33.16.2.4 Implement multi-drone coordination tests
- 33.16.2.5 Create mission execution tests
- 33.16.2.6 Implement geofence enforcement tests
- 33.16.2.7 Create failsafe behavior tests
- 33.16.2.8 Implement telemetry pipeline tests
- 33.16.2.9 Create video streaming tests
- 33.16.2.10 Implement database integration tests
- 33.16.2.11 Create API endpoint tests
- 33.16.2.12 Implement WebSocket tests
- 33.16.2.13 Create gRPC service tests
- 33.16.2.14 Implement domain integration tests
- 33.16.2.15 Create CI/CD pipeline integration
33.16.3 Simulation Testing#
Simulation-based validation.
- 33.16.3.1 Create automated simulation scenarios
- 33.16.3.2 Implement trajectory following accuracy tests
- 33.16.3.3 Create obstacle avoidance validation
- 33.16.3.4 Implement swarm coordination validation
- 33.16.3.5 Create formation transition tests
- 33.16.3.6 Implement emergency procedure tests
- 33.16.3.7 Create sensor failure injection tests
- 33.16.3.8 Implement communication loss tests
- 33.16.3.9 Create wind disturbance response tests
- 33.16.3.10 Implement battery depletion scenarios
- 33.16.3.11 Create GPS denial scenarios
- 33.16.3.12 Implement multi-drone collision scenarios
- 33.16.3.13 Create cinematography path validation
- 33.16.3.14 Implement pose estimation accuracy tests
- 33.16.3.15 Create performance benchmark suite
33.16.4 Hardware-in-the-Loop Testing#
Real hardware validation.
- 33.16.4.1 Create HITL test environment setup
- 33.16.4.2 Implement flight controller HITL tests
- 33.16.4.3 Create sensor integration HITL tests
- 33.16.4.4 Implement camera system HITL tests
- 33.16.4.5 Create gimbal control HITL tests
- 33.16.4.6 Implement communication HITL tests
- 33.16.4.7 Create edge AI inference HITL tests
- 33.16.4.8 Implement latency measurement tests
- 33.16.4.9 Create throughput benchmark tests
- 33.16.4.10 Implement reliability tests
33.17 Documentation#
33.17.1 API Documentation#
Comprehensive API reference documentation.
- 33.17.1.1 Create TypeDoc setup for SDK
- 33.17.1.2 Document all public interfaces
- 33.17.1.3 Document all public types
- 33.17.1.4 Document all public functions
- 33.17.1.5 Create code examples for each API
- 33.17.1.6 Document error codes and handling
- 33.17.1.7 Create API versioning documentation
- 33.17.1.8 Document rate limits and quotas
- 33.17.1.9 Create authentication documentation
- 33.17.1.10 Document WebSocket protocol
33.17.2 Integration Guides#
Step-by-step integration documentation.
- 33.17.2.1 Create quick start guide
- 33.17.2.2 Create DJI drone integration guide
- 33.17.2.3 Create PX4 drone integration guide
- 33.17.2.4 Create ArduPilot integration guide
- 33.17.2.5 Create swarm setup guide
- 33.17.2.6 Create cinematography guide
- 33.17.2.7 Create pose estimation integration guide
- 33.17.2.8 Create simulation setup guide
- 33.17.2.9 Create edge deployment guide
- 33.17.2.10 Create safety configuration guide
33.17.3 Architecture Documentation#
System design and architecture docs.
- 33.17.3.1 Create system architecture overview
- 33.17.3.2 Document library dependency graph
- 33.17.3.3 Create data flow diagrams
- 33.17.3.4 Document communication protocols
- 33.17.3.5 Create state machine diagrams
- 33.17.3.6 Document database schema
- 33.17.3.7 Create deployment architecture
- 33.17.3.8 Document scaling strategies
- 33.17.3.9 Create security architecture
- 33.17.3.10 Document disaster recovery
33.17.4 Tutorials and Examples#
Practical learning resources.
- 33.17.4.1 Create "Hello Drone" tutorial
- 33.17.4.2 Create waypoint mission tutorial
- 33.17.4.3 Create swarm formation tutorial
- 33.17.4.4 Create subject tracking tutorial
- 33.17.4.5 Create cinematic shot tutorial
- 33.17.4.6 Create indoor navigation tutorial
- 33.17.4.7 Create pose estimation tutorial
- 33.17.4.8 Create edge AI deployment tutorial
- 33.17.4.9 Create custom mission tutorial
- 33.17.4.10 Create example applications repository
33.18 Deployment and Operations#
33.18.1 Build and Packaging#
Build system and distribution.
- 33.18.1.1 Create library build configuration
- 33.18.1.2 Implement tree-shaking optimization
- 33.18.1.3 Create ESM/CJS dual builds
- 33.18.1.4 Implement type declaration generation
- 33.18.1.5 Create source map generation
- 33.18.1.6 Implement bundle size analysis
- 33.18.1.7 Create npm package publishing
- 33.18.1.8 Implement semantic versioning
- 33.18.1.9 Create changelog generation
- 33.18.1.10 Implement release automation
33.18.2 Service Deployment#
Server and service deployment.
- 33.18.2.1 Create Docker containerization
- 33.18.2.2 Implement Kubernetes deployment manifests
- 33.18.2.3 Create Helm charts
- 33.18.2.4 Implement health check endpoints
- 33.18.2.5 Create readiness/liveness probes
- 33.18.2.6 Implement horizontal pod autoscaling
- 33.18.2.7 Create service mesh integration
- 33.18.2.8 Implement secrets management
- 33.18.2.9 Create environment configuration
- 33.18.2.10 Implement blue-green deployment
33.18.3 Monitoring and Observability#
Production monitoring and debugging.
- 33.18.3.1 Implement Prometheus metrics
- 33.18.3.2 Create Grafana dashboards
- 33.18.3.3 Implement distributed tracing (Jaeger)
- 33.18.3.4 Create structured logging
- 33.18.3.5 Implement log aggregation
- 33.18.3.6 Create alerting rules
- 33.18.3.7 Implement error tracking (Sentry)
- 33.18.3.8 Create performance monitoring
- 33.18.3.9 Implement uptime monitoring
- 33.18.3.10 Create SLA reporting
Phase 33 Summary Statistics#
| Section | Task Count |
|---|---|
| 33.1 Core Infrastructure | 95 |
| 33.2 Flight Control Systems | 130 |
| 33.3 Navigation Systems | 155 |
| 33.4 Swarm Coordination | 135 |
| 33.5 AI Cinematography | 145 |
| 33.6 Sensor Integration | 120 |
| 33.7 Pose Estimation Integration | 125 |
| 33.8 Hardware Abstraction Layer | 115 |
| 33.9 Edge AI Processing | 80 |
| 33.10 Safety Systems | 80 |
| 33.11 Telemetry and Logging | 70 |
| 33.12 Simulation | 70 |
| 33.13 Client SDK | 75 |
| 33.14 Database | 50 |
| 33.15 Domain Integrations | 105 |
| 33.16 Testing and Quality Assurance | 55 |
| 33.17 Documentation | 40 |
| 33.18 Deployment and Operations | 30 |
| TOTAL Phase 33 (Oya) | ~1,675 |
Updated Grand Total#
| Phase | Task Count |
|---|---|
| Phase 0-14 (Original) | 796 |
| Phase 15: Physical Wellness & Fitness | 503 |
| Phase 16: Video-to-Animation Pipeline | 346 |
| Phase 17: State-of-the-Art AI Integration | 424 |
| Phase 18: Production Readiness Remediation | 847 |
| Phase 19: AWS ECS + RunPod Infrastructure | 126 |
| Phase 20: Eve/Aphrodite Platform | 145 |
| Phase 21: Nyx Cosmic Observatory | 251 |
| Phase 22: Tara Meditation Platform | 318 |
| Phase 23: Veritas AI News Agency | ~878 |
| Phase 24: Psyche AI Virtual Assistant | ~866 |
| Phase 25: Metis Educational Platform | ~679 |
| Phase 26: Yemaya Autonomous Platform | 360 |
| Phase 27: Project Obsidian (Production) | ~2,971 |
| Phase 28: Arete Personal Development | ~1,225 |
| Phase 29: Demeter Home Gardening Platform | ~1,977 |
| Phase 30: Hestia Culinary Intelligence | ~1,860 |
| Phase 31: Shakti Physical Discipline | ~1,900 |
| Phase 32: Kuan Yin Compassionate Guardian | ~1,615 |
| Phase 33: Oya AI Drone & Swarm Platform | ~1,675 |
| GRAND TOTAL | ~19,762 |
33.19 SOTA Gap Remediation - Critical 2025-2026 Additions#
This section addresses critical gaps identified through comprehensive web research comparing current Oya tasks against state-of-the-art technologies as of January 2026. These additions are essential for Oya to achieve industry-leading status.
33.19.1 Foundation Models & Transformer Integration#
Foundation models and transformer architectures represent the biggest shift in computer vision since CNNs. Missing these would leave Oya a generation behind.
33.19.1.1 Meta Sapiens Integration#
- 33.19.1.1.1 Integrate Meta Sapiens foundation model (300M image pretraining)
- 33.19.1.1.2 Implement Sapiens 0.3B parameter variant for edge deployment
- 33.19.1.1.3 Implement Sapiens 0.6B parameter variant for balanced performance
- 33.19.1.1.4 Implement Sapiens 1B parameter variant for high accuracy
- 33.19.1.1.5 Implement Sapiens 2B parameter variant for maximum capability
- 33.19.1.1.6 Create 208 body keypoint detection pipeline (vs 33 in MediaPipe)
- 33.19.1.1.7 Implement 243 facial keypoint detection
- 33.19.1.1.8 Create body-part segmentation using Sapiens
- 33.19.1.1.9 Implement surface normal estimation from Sapiens
- 33.19.1.1.10 Create depth estimation using Sapiens
- 33.19.1.1.11 Implement MAE (masked autoencoder) fine-tuning for aerial views
- 33.19.1.1.12 Create altitude-adaptive model selection (0.3B-2B based on height)
- 33.19.1.1.13 Implement 1K high-resolution inference pipeline
- 33.19.1.1.14 Create TensorRT optimization for Sapiens models
- 33.19.1.1.15 Implement model quantization for edge deployment (INT8/FP16)
33.19.1.2 YOLOv12 Integration#
- 33.19.1.2.1 Integrate YOLOv12 attention-centric architecture
- 33.19.1.2.2 Implement Area Attention Module (A2) for detection
- 33.19.1.2.3 Create R-ELAN (Residual Efficient Layer Aggregation) integration
- 33.19.1.2.4 Implement FlashAttention integration for efficiency
- 33.19.1.2.5 Create YOLOv12-N variant (40.6% mAP @ 1.64ms on T4)
- 33.19.1.2.6 Implement YOLOv12-S variant (48.0% mAP @ 2.61ms)
- 33.19.1.2.7 Create YOLOv12-M variant for balanced performance
- 33.19.1.2.8 Implement YOLOv12-L variant for high accuracy
- 33.19.1.2.9 Create YOLOv12-X variant for maximum capability
- 33.19.1.2.10 Implement aerial-specific fine-tuning on VisDrone2019
- 33.19.1.2.11 Create small object detection head for high-altitude operation
- 33.19.1.2.12 Implement TensorRT export for Jetson deployment
- 33.19.1.2.13 Create ONNX export for cross-platform deployment
- 33.19.1.2.14 Implement dynamic input resolution support
- 33.19.1.2.15 Create benchmark suite comparing YOLOv11 vs YOLOv12
33.19.1.3 RT-DETR Transformer Detection#
- 33.19.1.3.1 Integrate RT-DETR real-time transformer detector
- 33.19.1.3.2 Implement RT-DETRv4 with Vision Foundation Models (VFMs)
- 33.19.1.3.3 Create RT-DETRv4-S variant (45.0 AP @ 256 FPS)
- 33.19.1.3.4 Implement RT-DETRv4-M variant (50.2 AP @ 180 FPS)
- 33.19.1.3.5 Create RT-DETRv4-L variant (55.4 AP @ 124 FPS)
- 33.19.1.3.6 Implement RT-DETRv4-X variant for maximum accuracy
- 33.19.1.3.7 Create adjustable decoder layers without retraining
- 33.19.1.3.8 Implement end-to-end detection without NMS
- 33.19.1.3.9 Create hybrid encoder with transformer + CNN
- 33.19.1.3.10 Implement uncertainty-minimal query selection
- 33.19.1.3.11 Create TensorRT optimization for RT-DETR
- 33.19.1.3.12 Implement RT-DETR for drone-specific detection
33.19.1.4 UAV-DETR for Aerial Imagery#
- 33.19.1.4.1 Implement UAV-DETR transformer for aerial imagery
- 33.19.1.4.2 Create feature enhancement for small-object detection
- 33.19.1.4.3 Implement spatial-contextual alignment module
- 33.19.1.4.4 Create multi-scale feature fusion for varying altitudes
- 33.19.1.4.5 Implement feature degradation compensation
- 33.19.1.4.6 Create VisDrone2019 optimized weights (51.6% mAP@0.5)
- 33.19.1.4.7 Implement drone-vs-bird detection optimization
- 33.19.1.4.8 Create altitude-aware attention mechanism
- 33.19.1.4.9 Implement viewpoint-invariant detection
- 33.19.1.4.10 Create real-time inference pipeline for UAV platforms
33.19.1.5 DETRPose for Multi-Person Pose#
- 33.19.1.5.1 Integrate DETRPose transformer pose estimation
- 33.19.1.5.2 Implement Pose Denoising for keypoint estimation
- 33.19.1.5.3 Create multi-person pose detection without NMS
- 33.19.1.5.4 Implement end-to-end keypoint regression
- 33.19.1.5.5 Create COCO test-dev optimized model
- 33.19.1.5.6 Implement CrowdPose optimized model
- 33.19.1.5.7 Create real-time inference without quantization
- 33.19.1.5.8 Implement crowd scene handling
- 33.19.1.5.9 Create occlusion-aware pose estimation
- 33.19.1.5.10 Implement comparison benchmark vs YOLO11-Pose
33.19.1.6 SAM 2/SAM 3 Video Segmentation#
- 33.19.1.6.1 Integrate Meta SAM 2 video segmentation
- 33.19.1.6.2 Implement streaming memory system for temporal consistency
- 33.19.1.6.3 Create 44 FPS real-time segmentation pipeline
- 33.19.1.6.4 Implement 6x accuracy improvement over SAM 1
- 33.19.1.6.5 Create text prompt segmentation interface
- 33.19.1.6.6 Implement visual prompt segmentation interface
- 33.19.1.6.7 Create SAM 2.1 Developer Suite integration
- 33.19.1.6.8 Implement SAM 3 unified detection/segmentation/tracking
- 33.19.1.6.9 Create person segmentation for subject isolation
- 33.19.1.6.10 Implement object tracking with SAM memory
- 33.19.1.6.11 Create semantic segmentation for scene understanding
- 33.19.1.6.12 Implement instance segmentation for multi-person
- 33.19.1.6.13 Create panoptic segmentation pipeline
- 33.19.1.6.14 Implement TensorRT optimization for SAM models
- 33.19.1.6.15 Create edge deployment pipeline for SAM
33.19.2 Graph Neural Network Swarm Intelligence#
GNNs represent the SOTA for multi-agent coordination, enabling drones to reason about relationships and scale to larger swarms than traditional algorithms.
33.19.2.1 MAGNNET Task Allocation#
- 33.19.2.1.1 Implement MAGNNET (Multi-Agent GNN-based Task Allocation)
- 33.19.2.1.2 Create graph representation of drone swarm topology
- 33.19.2.1.3 Implement node features (drone state, capabilities)
- 33.19.2.1.4 Create edge features (communication links, distances)
- 33.19.2.1.5 Implement CTDE (Centralized Training, Decentralized Execution)
- 33.19.2.1.6 Create message passing neural network layers
- 33.19.2.1.7 Implement task embedding for heterogeneous missions
- 33.19.2.1.8 Create attention-based neighbor aggregation
- 33.19.2.1.9 Implement graph pooling for swarm-level decisions
- 33.19.2.1.10 Create distributed inference for edge deployment
33.19.2.2 GNSC Safety-Guaranteed Control#
- 33.19.2.2.1 Implement GNSC (Graph Neural Swarm Control)
- 33.19.2.2.2 Create safety shield integration for guaranteed collision avoidance
- 33.19.2.2.3 Implement control barrier functions with GNN
- 33.19.2.2.4 Create disaster-response swarm coordination
- 33.19.2.2.5 Implement dynamic graph topology handling
- 33.19.2.2.6 Create communication dropout resilience
- 33.19.2.2.7 Implement scalable inference (100+ drones)
- 33.19.2.2.8 Create real-time graph updates at 50+ Hz
- 33.19.2.2.9 Implement heterogeneous agent support
- 33.19.2.2.10 Create benchmark against ORCA baseline
33.19.2.3 STRGN Decentralized Coordination#
- 33.19.2.3.1 Implement STRGN (Soft Transformer Recurrent Graph Network)
- 33.19.2.3.2 Create partial observability handling
- 33.19.2.3.3 Implement recurrent state for temporal reasoning
- 33.19.2.3.4 Create soft attention for neighbor selection
- 33.19.2.3.5 Implement transformer encoder for global context
- 33.19.2.3.6 Create decentralized policy execution
- 33.19.2.3.7 Implement communication-efficient encoding
- 33.19.2.3.8 Create sim-to-real transfer pipeline
- 33.19.2.3.9 Implement policy distillation for edge
- 33.19.2.3.10 Create multi-task learning framework
33.19.2.4 SwarmRaft Consensus#
- 33.19.2.4.1 Implement SwarmRaft blockchain-inspired consensus
- 33.19.2.4.2 Create Raft leader election for swarm coordination
- 33.19.2.4.3 Implement crash-fault tolerant operation
- 33.19.2.4.4 Create GNSS-denied swarm consensus
- 33.19.2.4.5 Implement low computational overhead consensus
- 33.19.2.4.6 Create energy-efficient leader-based architecture
- 33.19.2.4.7 Implement log replication for state synchronization
- 33.19.2.4.8 Create membership change handling
- 33.19.2.4.9 Implement heartbeat-based failure detection
- 33.19.2.4.10 Create comparison with PBFT overhead
33.19.2.5 MAPPO Multi-Agent Learning#
- 33.19.2.5.1 Implement MAPPO (Multi-Agent PPO) training framework
- 33.19.2.5.2 Create centralized value function with decentralized policies
- 33.19.2.5.3 Implement parameter sharing across agents
- 33.19.2.5.4 Create curriculum learning for swarm complexity
- 33.19.2.5.5 Implement reward shaping for cooperative behavior
- 33.19.2.5.6 Create attention-based critic network
- 33.19.2.5.7 Implement experience replay for multi-agent
- 33.19.2.5.8 Create population-based training
- 33.19.2.5.9 Implement self-play for emergent behaviors
- 33.19.2.5.10 Create benchmark on StarCraft Multi-Agent Challenge
33.19.2.6 Large-Scale Swarm Support (1000+ Drones)#
- 33.19.2.6.1 Implement hierarchical swarm architecture for 1000+ drones
- 33.19.2.6.2 Create cluster-based coordination (platoons of 10-50)
- 33.19.2.6.3 Implement inter-cluster communication protocols
- 33.19.2.6.4 Create dynamic cluster formation/dissolution
- 33.19.2.6.5 Implement scalable collision avoidance (O(n log n))
- 33.19.2.6.6 Create spatial hashing for neighbor queries
- 33.19.2.6.7 Implement octree-based swarm management
- 33.19.2.6.8 Create distributed state estimation
- 33.19.2.6.9 Implement gossip protocol for swarm synchronization
- 33.19.2.6.10 Create benchmark against Damoda 10,197 drone record
33.19.3 3D Gaussian Splatting Integration#
3D Gaussian Splatting is the major 2024-2025 breakthrough in 3D reconstruction, offering real-time rendering at 100+ FPS with photorealistic quality.
33.19.3.1 DroneSplat for Aerial Reconstruction#
- 33.19.3.1.1 Implement DroneSplat (CVPR 2025) for drone imagery
- 33.19.3.1.2 Create adaptive masking for dynamic distractor elimination
- 33.19.3.1.3 Implement local-global segmentation heuristics
- 33.19.3.1.4 Create multi-view stereo predictions integration
- 33.19.3.1.5 Implement voxel-guided optimization strategy
- 33.19.3.1.6 Create robust 3D reconstruction from in-the-wild imagery
- 33.19.3.1.7 Implement moving object filtering
- 33.19.3.1.8 Create weather artifact handling (rain, fog)
- 33.19.3.1.9 Implement shadow handling in reconstruction
- 33.19.3.1.10 Create multi-flight session merging
33.19.3.2 Gaussian Splatting SLAM#
- 33.19.3.2.1 Implement WildGS-SLAM (CVPR 2025) for dynamic environments
- 33.19.3.2.2 Create simultaneous camera tracking and 3D Gaussian mapping
- 33.19.3.2.3 Implement dynamic component removal
- 33.19.3.2.4 Create static scene reconstruction
- 33.19.3.2.5 Implement FSGS real-time monocular SLAM (<1.5cm ATE)
- 33.19.3.2.6 Create Stochastic Local Newton optimization
- 33.19.3.2.7 Implement RGS-SLAM (925 FPS mapping)
- 33.19.3.2.8 Create compact storage (5x reduction)
- 33.19.3.2.9 Implement loop closure with Gaussian maps
- 33.19.3.2.10 Create relocalization in Gaussian representations
33.19.3.3 3DGS for Path Planning#
- 33.19.3.3.1 Implement trajectory planning using 3DGS scene representation
- 33.19.3.3.2 Create optimal viewpoint selection for novel view synthesis
- 33.19.3.3.3 Implement candidate pose evaluation for 3DGS capture
- 33.19.3.3.4 Create coverage path planning with 3DGS feedback
- 33.19.3.3.5 Implement SOUS VIDE (IROS 2025) for navigation
- 33.19.3.3.6 Create ActiveGS for active scene reconstruction
- 33.19.3.3.7 Implement collision checking in Gaussian representation
- 33.19.3.3.8 Create safe corridor extraction from 3DGS
- 33.19.3.3.9 Implement real-time path refinement
- 33.19.3.3.10 Create NBV (Next Best View) planning with 3DGS
33.19.3.4 3DGS for Human Bodies#
- 33.19.3.4.1 Implement 3D Gaussian Splatting for human reconstruction
- 33.19.3.4.2 Create SMPL(-X) vertex initialization for point cloud
- 33.19.3.4.3 Implement forward linear blend skinning transformation
- 33.19.3.4.4 Create real-time rendering at 361 FPS
- 33.19.3.4.5 Implement animatable human Gaussians
- 33.19.3.4.6 Create clothing and appearance modeling
- 33.19.3.4.7 Implement multi-view fusion for body Gaussians
- 33.19.3.4.8 Create temporal consistency in body reconstruction
- 33.19.3.4.9 Implement hand and face detail Gaussians
- 33.19.3.4.10 Create AR/VR avatar generation pipeline
33.19.3.5 NeRF Integration for Drones#
- 33.19.3.5.1 Implement NeRF-based scene representation for drones
- 33.19.3.5.2 Create instant-NGP for fast NeRF training
- 33.19.3.5.3 Implement Nerfacto for quality reconstruction
- 33.19.3.5.4 Create GRAD-NAV++ VLM-enabled navigation
- 33.19.3.5.5 Implement Active3D hierarchical uncertainty (AAAI 2026)
- 33.19.3.5.6 Create NeRF-to-mesh conversion for planning
- 33.19.3.5.7 Implement semantic NeRF for scene understanding
- 33.19.3.5.8 Create depth supervision from drone sensors
- 33.19.3.5.9 Implement NeRF quality metrics for flight planning
- 33.19.3.5.10 Create hybrid NeRF + 3DGS pipeline
33.19.4 Natural Language Drone Control#
Natural language interfaces represent the future of human-drone interaction, enabling intuitive control without specialized training.
33.19.4.1 ACDC Agentic Cinematography#
- 33.19.4.1.1 Implement ACDC (Agentic Aerial Cinematography from Dialogue Cues)
- 33.19.4.1.2 Create natural language to UAV trajectory conversion
- 33.19.4.1.3 Implement vision-language retrieval for initial waypoints
- 33.19.4.1.4 Create preference-based Bayesian optimization for pose refinement
- 33.19.4.1.5 Implement safe quadrotor motion planning integration
- 33.19.4.1.6 Create MPCC (Model Predictive Contouring Controller) for execution
- 33.19.4.1.7 Implement yaw-aware trajectory tracking
- 33.19.4.1.8 Create free-form prompt understanding
- 33.19.4.1.9 Implement cinematic vocabulary recognition
- 33.19.4.1.10 Create multi-turn dialogue for shot refinement
33.19.4.2 LLM Integration for Drone Control#
- 33.19.4.2.1 Implement LLM-based flight command interpretation
- 33.19.4.2.2 Create multimodal LLM for visual + text commands
- 33.19.4.2.3 Implement DJI FlightHub 2-style object detection via text
- 33.19.4.2.4 Create mission description to waypoint conversion
- 33.19.4.2.5 Implement safety constraint extraction from natural language
- 33.19.4.2.6 Create ambiguity resolution through clarification
- 33.19.4.2.7 Implement real-time command parsing at 10+ Hz
- 33.19.4.2.8 Create multi-language support (10+ languages)
- 33.19.4.2.9 Implement domain-specific fine-tuning for drones
- 33.19.4.2.10 Create on-device LLM for offline operation
33.19.4.3 Voice Command Interface#
- 33.19.4.3.1 Implement voice-activated drone control
- 33.19.4.3.2 Create wake word detection for hands-free operation
- 33.19.4.3.3 Implement noise-robust ASR (propeller noise filtering)
- 33.19.4.3.4 Create command confirmation with voice feedback
- 33.19.4.3.5 Implement emergency stop voice command
- 33.19.4.3.6 Create directional commands (left, right, up, down, etc.)
- 33.19.4.3.7 Implement camera control voice commands
- 33.19.4.3.8 Create mission control voice commands
- 33.19.4.3.9 Implement speaker identification for authorization
- 33.19.4.3.10 Create multi-operator voice coordination
33.19.4.4 Visual Language Models (VLMs)#
- 33.19.4.4.1 Implement VLM for scene understanding from drone camera
- 33.19.4.4.2 Create visual question answering about environment
- 33.19.4.4.3 Implement "find the person in red" style queries
- 33.19.4.4.4 Create visual grounding for target selection
- 33.19.4.4.5 Implement referring expression comprehension
- 33.19.4.4.6 Create scene description generation
- 33.19.4.4.7 Implement anomaly detection via VLM
- 33.19.4.4.8 Create zero-shot object detection via text
- 33.19.4.4.9 Implement TensorRT-Edge-LLM optimization
- 33.19.4.4.10 Create Jetson Thor deployment for VLMs
33.19.5 2025-2026 Hardware Platform Support#
Supporting the latest hardware is critical for performance leadership. Missing Jetson Thor (7.5x faster than Orin) would be a major competitive gap.
33.19.5.1 NVIDIA Jetson AGX Thor#
- 33.19.5.1.1 Create Jetson AGX Thor (T5000) integration framework
- 33.19.5.1.2 Implement 2,070 TOPS AI performance utilization
- 33.19.5.1.3 Create Blackwell GPU optimization for drone AI
- 33.19.5.1.4 Implement 128GB LPDDR5x memory management
- 33.19.5.1.5 Create power profile configurations (40-130W)
- 33.19.5.1.6 Implement large transformer model deployment
- 33.19.5.1.7 Create VLM/VLA real-time inference pipelines
- 33.19.5.1.8 Implement multi-4K video processing (10x 4Kp60)
- 33.19.5.1.9 Create 8K video decode optimization (4x 8Kp30)
- 33.19.5.1.10 Implement JetPack 7.x SDK integration
33.19.5.2 NVIDIA Jetson T4000#
- 33.19.5.2.1 Create Jetson T4000 integration framework
- 33.19.5.2.2 Implement 1,200 TFLOPS FP4 performance utilization
- 33.19.5.2.3 Create 64GB memory optimization
- 33.19.5.2.4 Implement real-time 4K video processing
- 33.19.5.2.5 Create TensorRT Edge-LLM deployment
- 33.19.5.2.6 Implement Unified Video Codec SDK integration
- 33.19.5.2.7 Create hardware-accelerated encoding/decoding
- 33.19.5.2.8 Implement power-efficient inference modes
- 33.19.5.2.9 Create thermal management for aerial deployment
- 33.19.5.2.10 Implement JetPack 7.1 features
33.19.5.3 Alternative Edge AI Chips#
- 33.19.5.3.1 Implement Hailo-8 integration (26 TOPS @ 2.5W)
- 33.19.5.3.2 Create Hailo-10 GenAI/LLM support
- 33.19.5.3.3 Implement SiMa.ai MLSoC integration (50+ TOPS @ <5W)
- 33.19.5.3.4 Create Qualcomm QRB5165 15 TOPS integration
- 33.19.5.3.5 Implement 5G connectivity with Qualcomm platform
- 33.19.5.3.6 Create Google Coral Edge TPU integration
- 33.19.5.3.7 Implement Intel Movidius NCS2 support
- 33.19.5.3.8 Create chip-agnostic inference abstraction
- 33.19.5.3.9 Implement performance comparison benchmarks
- 33.19.5.3.10 Create deployment guides for each platform
33.19.5.4 DJI 2025 Platform Support#
- 33.19.5.4.1 Implement DJI Matrice 4 Series support (Jan 2025)
- 33.19.5.4.2 Create Matrice 4T thermal camera integration
- 33.19.5.4.3 Implement Matrice 4E mapping camera integration
- 33.19.5.4.4 Create tri-camera system support (24mm, 70mm, 168mm)
- 33.19.5.4.5 Implement onboard AI computing integration
- 33.19.5.4.6 Create laser range finder integration (5,905 ft)
- 33.19.5.4.7 Implement DJI Dock 3 support (Aug 2025)
- 33.19.5.4.8 Create mobile vehicle-mounted dock deployment
- 33.19.5.4.9 Implement 10-second takeoff integration
- 33.19.5.4.10 Create 27-minute rapid charging management
- 33.19.5.4.11 Implement DJI O4+ 30km transmission
- 33.19.5.4.12 Create DJI Flip sub-250g platform support
- 33.19.5.4.13 Implement MSDK V5 latest features
- 33.19.5.4.14 Create DJI FlightHub 2 integration
- 33.19.5.4.15 Implement DJI FlightHub 2 AIO hardware support
33.19.5.5 Skydio 2025 Platform Support#
- 33.19.5.5.1 Implement Skydio R10 indoor drone support (Fall 2025)
- 33.19.5.5.2 Create 1.7 lb indoor-optimized flight profiles
- 33.19.5.5.3 Implement NightSense zero-light obstacle avoidance
- 33.19.5.5.4 Create integrated lighting control
- 33.19.5.5.5 Implement two-way audio integration
- 33.19.5.5.6 Create Skydio F10 fixed-wing support
- 33.19.5.5.7 Implement 80+ mph high-speed flight profiles
- 33.19.5.5.8 Create 90+ minute endurance management
- 33.19.5.5.9 Implement Connect Fusion (SL + 5G auto-switch)
- 33.19.5.5.10 Create Skydio Cloud device pages integration
33.19.5.6 Latest Sensors#
- 33.19.5.6.1 Implement Sony IMX927/937 105MP global shutter support
- 33.19.5.6.2 Create Sony IMX775 RGB-IR sensor integration
- 33.19.5.6.3 Implement Hesai FTX solid-state LiDAR (2026)
- 33.19.5.6.4 Create Hesai ATX long-range LiDAR integration
- 33.19.5.6.5 Implement Livox Mid-360 latest firmware
- 33.19.5.6.6 Create FLIR Boson+ 640x512 thermal integration
- 33.19.5.6.7 Implement Intel RealSense (independent company) D455
- 33.19.5.6.8 Create Depth Anything V2/V3 monocular depth
- 33.19.5.6.9 Implement Apple Depth Pro integration
- 33.19.5.6.10 Create sensor fusion with 2025 sensors
33.19.6 Advanced SLAM and VIO (2025)#
Latest SLAM and VIO algorithms offer 10x improvement in accuracy and robustness.
33.19.6.1 Deep Learning Enhanced SLAM#
- 33.19.6.1.1 Implement SuperPoint-SLAM3 (0.34% vs 4.15% error)
- 33.19.6.1.2 Create SuperPoint deep learning feature integration
- 33.19.6.1.3 Implement adaptive non-maximal suppression
- 33.19.6.1.4 Create NetVLAD-based loop closure
- 33.19.6.1.5 Implement DI-SLAM for dynamic indoor (97% improvement)
- 33.19.6.1.6 Create parallel YOLOv5s object detection thread
- 33.19.6.1.7 Implement ORB-GMS-SLAM3 (75% faster matching)
- 33.19.6.1.8 Create real-time dense map construction
- 33.19.6.1.9 Implement AirSLAM illumination-robust point-line SLAM
- 33.19.6.1.10 Create PLNet for keypoint and line detection
- 33.19.6.1.11 Implement LightGlue feature matching
- 33.19.6.1.12 Create Rover-SLAM hybrid framework
- 33.19.6.1.13 Implement deep feature extraction and matching
- 33.19.6.1.14 Create monocular/stereo/inertial configurations
- 33.19.6.1.15 Implement DPLAGNN Graph Neural Network SLAM
33.19.6.2 Latest VIO Systems#
- 33.19.6.2.1 Implement RWKV-VIO (Sep 2025) linear complexity VIO
- 33.19.6.2.2 Create RWKV architecture for temporal modeling
- 33.19.6.2.3 Implement XR-VIO high-precision with fast init
- 33.19.6.2.4 Create SDS-VIO direct sparse stereo VIO
- 33.19.6.2.5 Implement depth initialization from visual-inertial
- 33.19.6.2.6 Create stereo tracking with marginalization
- 33.19.6.2.7 Implement HDVIO2.0 hybrid dynamics (25 km/h winds)
- 33.19.6.2.8 Create external force estimation
- 33.19.6.2.9 Implement downfacing VIO for nano-UAVs
- 33.19.6.2.10 Create RISC-V ultra-low-power quantization
33.19.6.3 Latest LiDAR-Inertial Odometry#
- 33.19.6.3.1 Implement Super-LIO ARM-compatible odometry
- 33.19.6.3.2 Create OctVox compact octo-voxel mapping
- 33.19.6.3.3 Implement HKNN fast KNN search
- 33.19.6.3.4 Create VOX-LIO adaptive hash voxel mapping
- 33.19.6.3.5 Implement surfel feature extraction (63.9% APE reduction)
- 33.19.6.3.6 Create LIO-BIM Building Information Modeling coupling
- 33.19.6.3.7 Implement STATIC-LIO geometric + terrestrial + motion fusion
- 33.19.6.3.8 Create 92.4% localization error reduction
- 33.19.6.3.9 Implement sparse-sensing scenario handling
- 33.19.6.3.10 Create narrow-scene navigation support
33.19.6.4 UWB FiRa 4.0 Support#
- 33.19.6.4.1 Implement FiRa 4.0 specification (Dec 2025)
- 33.19.6.4.2 Create UL-TDoA for optimized tag power
- 33.19.6.4.3 Implement IEEE 802.15.4-2024 features
- 33.19.6.4.4 Create FiRa 3.0 Hybrid UWB Scheduling (HUS)
- 33.19.6.4.5 Implement dedicated data transfer independent of ranging
- 33.19.6.4.6 Create CCC Digital Key UWB integration
- 33.19.6.4.7 Implement dual-anchor 3D positioning
- 33.19.6.4.8 Create ML-based 3D localization with AAC
- 33.19.6.4.9 Implement Qorvo DWM3000 10cm precision
- 33.19.6.4.10 Create Apple U1/U2 interoperability
33.19.7 Event Camera (Neuromorphic) Navigation#
Event cameras offer sub-millisecond latency and 140+ dB dynamic range, enabling operation in conditions impossible for conventional cameras.
33.19.7.1 Prophesee Event Camera Integration#
- 33.19.7.1.1 Implement Prophesee GenX320 starter kit integration
- 33.19.7.1.2 Create 320x320 event stream processing
- 33.19.7.1.3 Implement 140+ dB dynamic range utilization
- 33.19.7.1.4 Create 10,000 fps equivalent event processing
- 33.19.7.1.5 Implement sub-millisecond latency pipeline
- 33.19.7.1.6 Create Prophesee EVK4 HD integration (high-speed)
- 33.19.7.1.7 Implement Raspberry Pi 5 compatibility
- 33.19.7.1.8 Create Jetson deployment pipeline
- 33.19.7.1.9 Implement event-to-frame reconstruction
- 33.19.7.1.10 Create hybrid event + frame processing
33.19.7.2 Event-Based VIO and SLAM#
- 33.19.7.2.1 Implement EV-Planner real-time neuromorphic navigation
- 33.19.7.2.2 Create event-based feature tracking
- 33.19.7.2.3 Implement event-based optical flow
- 33.19.7.2.4 Create event-inertial odometry
- 33.19.7.2.5 Implement SuperEvent (ICCV 2025) keypoint detection
- 33.19.7.2.6 Create cross-modal learning for event SLAM
- 33.19.7.2.7 Implement event-based depth estimation
- 33.19.7.2.8 Create event-based 3D reconstruction
- 33.19.7.2.9 Implement asynchronous sensor fusion
- 33.19.7.2.10 Create event-based loop closure
33.19.7.3 Neuromorphic Applications#
- 33.19.7.3.1 Implement Neuro-LIFT LLM-based autonomous flight
- 33.19.7.3.2 Create zero motion blur obstacle avoidance
- 33.19.7.3.3 Implement drone-to-drone tracking with events
- 33.19.7.3.4 Create powerline inspection with event cameras
- 33.19.7.3.5 Implement high-speed drone racing support (500+ km/h equiv)
- 33.19.7.3.6 Create low-light navigation with events
- 33.19.7.3.7 Implement HDR scene handling (no saturation)
- 33.19.7.3.8 Create fast gesture recognition
- 33.19.7.3.9 Implement event-based human tracking
- 33.19.7.3.10 Create energy-efficient always-on sensing
33.19.8 FAA Part 108 BVLOS Compliance#
Part 108 final rule expected Q1 2026 - critical for commercial operations.
33.19.8.1 Part 108 Regulatory Framework#
- 33.19.8.1.1 Implement Part 108 BVLOS rule compliance framework
- 33.19.8.1.2 Create 400 feet AGL operational ceiling enforcement
- 33.19.8.1.3 Implement pre-designated launch location management
- 33.19.8.1.4 Create access-controlled launch location verification
- 33.19.8.1.5 Implement five population density category classification
- 33.19.8.1.6 Create flights over people compliance (not open-air crowds)
- 33.19.8.1.7 Implement 1,320 lb weight class management
- 33.19.8.1.8 Create consensus standards compliance verification
- 33.19.8.1.9 Implement 25-active-UAS cap per operator
- 33.19.8.1.10 Create 110 lb BVLOS weight limit enforcement
33.19.8.2 ADSP Integration#
- 33.19.8.2.1 Implement ADSP (Automated Data Service Provider) integration
- 33.19.8.2.2 Create real-time airspace data consumption
- 33.19.8.2.3 Implement dynamic airspace updates
- 33.19.8.2.4 Create LAANC integration for automated authorization
- 33.19.8.2.5 Implement UTM service provider connectivity
- 33.19.8.2.6 Create airspace reservation requests
- 33.19.8.2.7 Implement flight plan filing automation
- 33.19.8.2.8 Create deconfliction service integration
- 33.19.8.2.9 Implement weather data integration
- 33.19.8.2.10 Create TFR (Temporary Flight Restriction) updates
33.19.8.3 Enhanced Remote ID#
- 33.19.8.3.1 Implement ASTM F3586 MOC compliance
- 33.19.8.3.2 Create TM-RID (Trusted Multifaceted Remote ID) support
- 33.19.8.3.3 Implement IETF DRIP working group specifications
- 33.19.8.3.4 Create secure Remote ID broadcast
- 33.19.8.3.5 Implement Remote ID receiver for awareness
- 33.19.8.3.6 Create law enforcement Remote ID access
- 33.19.8.3.7 Implement fleet-wide Remote ID management
- 33.19.8.3.8 Create Remote ID compliance verification
- 33.19.8.3.9 Implement Remote ID anomaly detection
- 33.19.8.3.10 Create Remote ID data logging
33.19.8.4 Certified DAA Systems#
- 33.19.8.4.1 Implement TSO-C211/C212 compliant DAA preparation
- 33.19.8.4.2 Create Casia G ground-based surveillance integration
- 33.19.8.4.3 Implement Casia G Release 4.0 nighttime detection
- 33.19.8.4.4 Create 360-degree cooperative detection (2km range)
- 33.19.8.4.5 Implement non-cooperative aircraft detection
- 33.19.8.4.6 Create Echodyne EchoFlight ABDAA integration
- 33.19.8.4.7 Implement EchoGuard ground-based radar
- 33.19.8.4.8 Create ADS-B In receiver integration
- 33.19.8.4.9 Implement aircraft proximity alert system
- 33.19.8.4.10 Create autonomous avoidance maneuvers
33.19.8.5 Parachute and FTS Compliance#
- 33.19.8.5.1 Implement ASTM F3322-24a parachute standard (49 tests)
- 33.19.8.5.2 Create ParaZero SafeAir M4 integration
- 33.19.8.5.3 Implement Category 2 OOP compliance without waiver
- 33.19.8.5.4 Create triple sensor redundancy for deployment
- 33.19.8.5.5 Implement automotive airbag deployment technology
- 33.19.8.5.6 Create Vixos Beyond satellite FTS integration
- 33.19.8.5.7 Implement Iridium satellite termination link
- 33.19.8.5.8 Create geofence-triggered automatic termination
- 33.19.8.5.9 Implement encrypted satellite command
- 33.19.8.5.10 Create EASA SAIL III FTS compliance
33.19.9 Modern Simulation Platforms#
Next-generation simulation for realistic training, testing, and validation.
33.19.9.1 Colosseum (Microsoft AirSim Successor)#
- 33.19.9.1.1 Migrate from AirSim to Colosseum simulation
- 33.19.9.1.2 Implement Colosseum-ROS2 bridge integration
- 33.19.9.1.3 Create multi-drone Colosseum scenarios
- 33.19.9.1.4 Implement physics-accurate collision modeling
- 33.19.9.1.5 Create weather simulation environments
- 33.19.9.1.6 Implement sensor noise and failure simulation
- 33.19.9.1.7 Create photorealistic rendering pipelines
- 33.19.9.1.8 Implement hardware-in-the-loop (HITL) mode
- 33.19.9.1.9 Create software-in-the-loop (SITL) mode
- 33.19.9.1.10 Implement distributed simulation support
33.19.9.2 NVIDIA AirGen (Cosmos Foundation)#
- 33.19.9.2.1 Integrate AirGen Cosmos-based simulation
- 33.19.9.2.2 Implement World Foundation Model environments
- 33.19.9.2.3 Create procedural world generation
- 33.19.9.2.4 Implement physics-informed neural simulation
- 33.19.9.2.5 Create domain randomization pipelines
- 33.19.9.2.6 Implement synthetic data generation
- 33.19.9.2.7 Create sim-to-real transfer optimization
- 33.19.9.2.8 Implement digital twin synchronization
- 33.19.9.2.9 Create massive parallel simulation
- 33.19.9.2.10 Implement RTX ray-traced environments
33.19.9.3 Pegasus Simulator (Isaac Sim)#
- 33.19.9.3.1 Integrate Pegasus Simulator framework
- 33.19.9.3.2 Implement Isaac Sim drone environments
- 33.19.9.3.3 Create PX4-SITL integration
- 33.19.9.3.4 Implement MARL training pipelines
- 33.19.9.3.5 Create USD-based scene composition
- 33.19.9.3.6 Implement PhysX-based aerodynamics
- 33.19.9.3.7 Create ROS2 bridge for Isaac Sim
- 33.19.9.3.8 Implement reinforcement learning environments
- 33.19.9.3.9 Create terrain generation tools
- 33.19.9.3.10 Implement crowd and vehicle simulation
33.19.9.4 OmniDrones (JAX-Based)#
- 33.19.9.4.1 Integrate OmniDrones JAX framework
- 33.19.9.4.2 Implement GPU-accelerated batch simulation
- 33.19.9.4.3 Create thousands of parallel environments
- 33.19.9.4.4 Implement differentiable simulation
- 33.19.9.4.5 Create end-to-end gradient computation
- 33.19.9.4.6 Implement fast policy iteration
- 33.19.9.4.7 Create vectorized environment wrapper
- 33.19.9.4.8 Implement JAX-Gymnasium interface
- 33.19.9.4.9 Create multi-agent JAX environments
- 33.19.9.4.10 Implement sample-efficient training
33.19.9.5 FlightForge (Blender-Based)#
- 33.19.9.5.1 Integrate FlightForge Blender simulation
- 33.19.9.5.2 Implement Cycles ray-tracing for datasets
- 33.19.9.5.3 Create photorealistic synthetic data
- 33.19.9.5.4 Implement ground truth annotation generation
- 33.19.9.5.5 Create depth and segmentation maps
- 33.19.9.5.6 Implement optical flow ground truth
- 33.19.9.5.7 Create diverse lighting conditions
- 33.19.9.5.8 Implement material variation pipeline
- 33.19.9.5.9 Create procedural asset generation
- 33.19.9.5.10 Implement batch rendering farm
33.19.9.6 Flightmare (ETH Zurich)#
- 33.19.9.6.1 Integrate Flightmare high-speed simulation
- 33.19.9.6.2 Implement Unity-based visualization
- 33.19.9.6.3 Create racing drone environments
- 33.19.9.6.4 Implement sub-millisecond physics steps
- 33.19.9.6.5 Create agile flight training scenarios
- 33.19.9.6.6 Implement flexible camera placement
- 33.19.9.6.7 Create IMU and motor simulation
- 33.19.9.6.8 Implement latency-aware training
- 33.19.9.6.9 Create aerobatic maneuver validation
- 33.19.9.6.10 Implement perception-aware planning training
33.19.9.7 Unified Simulation Framework#
- 33.19.9.7.1 Create unified simulation API abstraction
- 33.19.9.7.2 Implement simulator-agnostic training
- 33.19.9.7.3 Create cross-simulator scenario sharing
- 33.19.9.7.4 Implement simulation fidelity scaling
- 33.19.9.7.5 Create automated benchmark suites
- 33.19.9.7.6 Implement regression testing in simulation
- 33.19.9.7.7 Create CI/CD simulation integration
- 33.19.9.7.8 Implement cloud simulation scaling
- 33.19.9.7.9 Create simulation replay and analysis
- 33.19.9.7.10 Implement failure injection testing
33.19.10 Advanced Pose Estimation Models#
State-of-the-art 2025-2026 pose estimation for cinematography and tracking.
33.19.10.1 Foundation Pose Models#
- 33.19.10.1.1 Integrate Meta Sapiens pose (243 keypoints, 2B params)
- 33.19.10.1.2 Implement Sapiens 300M training data leverage
- 33.19.10.1.3 Create Sapiens depth estimation integration
- 33.19.10.1.4 Implement Sapiens surface normal estimation
- 33.19.10.1.5 Create Sapiens body part segmentation
- 33.19.10.1.6 Implement multi-person Sapiens inference
- 33.19.10.1.7 Create edge-optimized Sapiens variants
- 33.19.10.1.8 Implement COCO-WholeBody-133 baseline
- 33.19.10.1.9 Create pose quality scoring
- 33.19.10.1.10 Implement occlusion handling with Sapiens
33.19.10.2 Video-Based 3D Reconstruction#
- 33.19.10.2.1 Integrate WHAM (World-grounded Human Avatar Mesh)
- 33.19.10.2.2 Implement SLAHMR global trajectory estimation
- 33.19.10.2.3 Create world-coordinate 3D pose recovery
- 33.19.10.2.4 Implement ground contact estimation
- 33.19.10.2.5 Create physics-consistent motion reconstruction
- 33.19.10.2.6 Implement foot sliding correction
- 33.19.10.2.7 Create camera-independent motion capture
- 33.19.10.2.8 Implement long-range temporal modeling
- 33.19.10.2.9 Create SMPL mesh recovery from video
- 33.19.10.2.10 Implement motion interpolation
33.19.10.3 Transformer-Based Pose#
- 33.19.10.3.1 Integrate TokenHMR transformer pose model
- 33.19.10.3.2 Implement attention-based keypoint detection
- 33.19.10.3.3 Create pose tokenization for LLM integration
- 33.19.10.3.4 Implement Multi-HMR multi-person tracking
- 33.19.10.3.5 Create DETRPose detection integration
- 33.19.10.3.6 Implement ViTPose++ backbone integration
- 33.19.10.3.7 Create hierarchical pose transformers
- 33.19.10.3.8 Implement temporal attention for video
- 33.19.10.3.9 Create cross-view attention for multi-cam
- 33.19.10.3.10 Implement efficient pose head design
33.19.10.4 Aerial-Specific Pose Models#
- 33.19.10.4.1 Integrate Flycon drone cinematography pose
- 33.19.10.4.2 Implement aerial viewpoint handling
- 33.19.10.4.3 Create top-down pose estimation
- 33.19.10.4.4 Implement altitude-invariant detection
- 33.19.10.4.5 Create drone-to-subject distance estimation
- 33.19.10.4.6 Implement action recognition from aerial view
- 33.19.10.4.7 Create sports action classification
- 33.19.10.4.8 Implement group activity recognition
- 33.19.10.4.9 Create UAV-specific pose datasets
- 33.19.10.4.10 Implement multi-altitude pose transfer
33.19.10.5 State Space Pose Models#
- 33.19.10.5.1 Integrate MV-SSM multi-view state space
- 33.19.10.5.2 Implement Mamba-based pose estimation
- 33.19.10.5.3 Create selective scan for keypoints
- 33.19.10.5.4 Implement long-sequence pose modeling
- 33.19.10.5.5 Create linear complexity pose inference
- 33.19.10.5.6 Implement bidirectional state space
- 33.19.10.5.7 Create efficient video pose processing
- 33.19.10.5.8 Implement cross-view state fusion
- 33.19.10.5.9 Create memory-efficient pose tracking
- 33.19.10.5.10 Implement real-time SSM inference
33.19.10.6 Occlusion and Robustness#
- 33.19.10.6.1 Integrate ORFormer occlusion-robust model
- 33.19.10.6.2 Implement self-occlusion handling
- 33.19.10.6.3 Create inter-person occlusion reasoning
- 33.19.10.6.4 Implement partial visibility estimation
- 33.19.10.6.5 Create visibility-aware confidence scoring
- 33.19.10.6.6 Implement hallucination for occluded parts
- 33.19.10.6.7 Create temporal occlusion tracking
- 33.19.10.6.8 Implement multi-view occlusion fusion
- 33.19.10.6.9 Create depth-aware occlusion reasoning
- 33.19.10.6.10 Implement robust pose in crowded scenes
33.19.10.7 Real-Time Edge Pose#
- 33.19.10.7.1 Create TensorRT pose model optimization
- 33.19.10.7.2 Implement INT8 quantized pose models
- 33.19.10.7.3 Create Jetson-optimized pose pipelines
- 33.19.10.7.4 Implement MoveNet for real-time tracking
- 33.19.10.7.5 Create BlazePose lightweight integration
- 33.19.10.7.6 Implement pose model pruning
- 33.19.10.7.7 Create knowledge distillation for edge
- 33.19.10.7.8 Implement 60+ FPS pose inference
- 33.19.10.7.9 Create multi-person 30 FPS tracking
- 33.19.10.7.10 Implement pose streaming optimization
33.19.11 Enterprise Platform Features#
Commercial-grade platform capabilities for DaaS, fleet management, and operations.
33.19.11.1 Drone-as-a-Service (DaaS) Platform#
- 33.19.11.1.1 Implement multi-tenant DaaS architecture
- 33.19.11.1.2 Create subscription-based drone access
- 33.19.11.1.3 Implement usage-based billing system
- 33.19.11.1.4 Create customer portal and dashboard
- 33.19.11.1.5 Implement API access management
- 33.19.11.1.6 Create SLA monitoring and enforcement
- 33.19.11.1.7 Implement white-label platform support
- 33.19.11.1.8 Create enterprise SSO integration
- 33.19.11.1.9 Implement audit logging and compliance
- 33.19.11.1.10 Create customer data isolation
33.19.11.2 Fleet Management System#
- 33.19.11.2.1 Create centralized fleet dashboard
- 33.19.11.2.2 Implement real-time fleet status monitoring
- 33.19.11.2.3 Create predictive maintenance scheduling
- 33.19.11.2.4 Implement battery health fleet analytics
- 33.19.11.2.5 Create drone utilization optimization
- 33.19.11.2.6 Implement maintenance work order system
- 33.19.11.2.7 Create spare parts inventory management
- 33.19.11.2.8 Implement flight crew scheduling
- 33.19.11.2.9 Create pilot certification tracking
- 33.19.11.2.10 Implement insurance integration
33.19.11.3 UTM Integration#
- 33.19.11.3.1 Implement ASTM F3548-21 USS-to-USS
- 33.19.11.3.2 Create NASA UTM integration
- 33.19.11.3.3 Implement Altitude Angel GuardianUTM
- 33.19.11.3.4 Create AirMap integration
- 33.19.11.3.5 Implement LAANC automated authorization
- 33.19.11.3.6 Create strategic deconfliction
- 33.19.11.3.7 Implement tactical deconfliction
- 33.19.11.3.8 Create conformance monitoring
- 33.19.11.3.9 Implement alert notification system
- 33.19.11.3.10 Create airspace priority management
33.19.11.4 Drone-in-a-Box (DiB)#
- 33.19.11.4.1 Implement automated drone dock system
- 33.19.11.4.2 Create precision landing for docking
- 33.19.11.4.3 Implement automated battery swap
- 33.19.11.4.4 Create weather station integration
- 33.19.11.4.5 Implement remote dock monitoring
- 33.19.11.4.6 Create scheduled mission dispatch
- 33.19.11.4.7 Implement multi-dock coordination
- 33.19.11.4.8 Create dock security and access control
- 33.19.11.4.9 Implement edge processing at dock
- 33.19.11.4.10 Create dock maintenance automation
33.19.11.5 AI-Powered Mission Agents#
- 33.19.11.5.1 Create natural language mission planning
- 33.19.11.5.2 Implement autonomous mission generation
- 33.19.11.5.3 Create LLM-based anomaly interpretation
- 33.19.11.5.4 Implement conversational flight control
- 33.19.11.5.5 Create AI situation assessment
- 33.19.11.5.6 Implement predictive mission optimization
- 33.19.11.5.7 Create multi-modal instruction understanding
- 33.19.11.5.8 Implement chain-of-thought mission planning
- 33.19.11.5.9 Create AI-generated flight reports
- 33.19.11.5.10 Implement RAG for regulations/procedures
33.19.11.6 Enterprise Analytics#
- 33.19.11.6.1 Create comprehensive operations dashboard
- 33.19.11.6.2 Implement mission success analytics
- 33.19.11.6.3 Create cost-per-flight tracking
- 33.19.11.6.4 Implement ROI measurement tools
- 33.19.11.6.5 Create carbon footprint tracking
- 33.19.11.6.6 Implement benchmark comparisons
- 33.19.11.6.7 Create custom report builder
- 33.19.11.6.8 Implement data export and integration
- 33.19.11.6.9 Create predictive analytics
- 33.19.11.6.10 Implement anomaly detection alerts
33.19.11.7 Industry-Specific Solutions#
- 33.19.11.7.1 Create construction site monitoring module
- 33.19.11.7.2 Implement infrastructure inspection workflows
- 33.19.11.7.3 Create agriculture precision mapping
- 33.19.11.7.4 Implement mining volumetric analysis
- 33.19.11.7.5 Create solar farm inspection
- 33.19.11.7.6 Implement wind turbine inspection
- 33.19.11.7.7 Create powerline corridor management
- 33.19.11.7.8 Implement oil/gas pipeline monitoring
- 33.19.11.7.9 Create emergency response integration
- 33.19.11.7.10 Implement public safety workflows
33.19.12 Next-Gen Power Systems#
Advanced battery and power technologies for extended endurance and capabilities.
33.19.12.1 Solid-State Battery Integration#
- 33.19.12.1.1 Create solid-state battery BMS integration
- 33.19.12.1.2 Implement higher energy density optimization
- 33.19.12.1.3 Create fast charging profile management
- 33.19.12.1.4 Implement extended temperature range support
- 33.19.12.1.5 Create cycle life optimization
- 33.19.12.1.6 Implement safety monitoring for solid-state
- 33.19.12.1.7 Create cell balancing for solid-state packs
- 33.19.12.1.8 Implement SOC estimation refinement
- 33.19.12.1.9 Create degradation prediction models
- 33.19.12.1.10 Implement hybrid LiPo/solid-state support
33.19.12.2 Hydrogen Fuel Cell Systems#
- 33.19.12.2.1 Implement hydrogen fuel cell power management
- 33.19.12.2.2 Create fuel cell + battery hybrid control
- 33.19.12.2.3 Implement hydrogen tank monitoring
- 33.19.12.2.4 Create refueling system integration
- 33.19.12.2.5 Implement fuel cell efficiency optimization
- 33.19.12.2.6 Create cold weather startup procedures
- 33.19.12.2.7 Implement altitude compensation
- 33.19.12.2.8 Create hydrogen leak detection
- 33.19.12.2.9 Implement extended endurance planning (2+ hours)
- 33.19.12.2.10 Create fuel cell health monitoring
33.19.12.3 Advanced BMS Features#
- 33.19.12.3.1 Implement AI-based SOH prediction
- 33.19.12.3.2 Create thermal runaway prediction
- 33.19.12.3.3 Implement cell-level impedance tracking
- 33.19.12.3.4 Create capacity fade modeling
- 33.19.12.3.5 Implement optimal charging curves per cell
- 33.19.12.3.6 Create battery swap hot-plug support
- 33.19.12.3.7 Implement fleet battery rotation
- 33.19.12.3.8 Create battery passport system
- 33.19.12.3.9 Implement second-life battery evaluation
- 33.19.12.3.10 Create battery recall management
33.19.12.4 Energy Harvesting#
- 33.19.12.4.1 Create solar panel integration for fixed-wing
- 33.19.12.4.2 Implement regenerative braking during descent
- 33.19.12.4.3 Create thermal harvesting integration
- 33.19.12.4.4 Implement wind energy harvesting (gliding)
- 33.19.12.4.5 Create RF energy harvesting for charging
- 33.19.12.4.6 Implement kinetic energy recovery
- 33.19.12.4.7 Create hybrid propulsion management
- 33.19.12.4.8 Implement energy-positive mission planning
- 33.19.12.4.9 Create perch-and-charge locations
- 33.19.12.4.10 Implement wireless charging pad landing
33.19.12.5 Power Distribution Unit#
- 33.19.12.5.1 Implement intelligent power distribution
- 33.19.12.5.2 Create fault-tolerant power switching
- 33.19.12.5.3 Implement priority-based load shedding
- 33.19.12.5.4 Create power consumption profiling
- 33.19.12.5.5 Implement component power monitoring
- 33.19.12.5.6 Create emergency power reserve
- 33.19.12.5.7 Implement motor power optimization
- 33.19.12.5.8 Create compute power scaling
- 33.19.12.5.9 Implement sensor power management
- 33.19.12.5.10 Create communication power optimization
33.19.12.6 Charging Infrastructure#
- 33.19.12.6.1 Create automated charging station integration
- 33.19.12.6.2 Implement fast charging protocols
- 33.19.12.6.3 Create battery swap station support
- 33.19.12.6.4 Implement charging queue management
- 33.19.12.6.5 Create charging scheduling optimization
- 33.19.12.6.6 Implement grid load balancing
- 33.19.12.6.7 Create solar-powered charging stations
- 33.19.12.6.8 Implement charging station health monitoring
- 33.19.12.6.9 Create mobile charging solutions
- 33.19.12.6.10 Implement V2G (vehicle-to-grid) support
Phase 33 Summary#
Phase 33 establishes the Oya domain as a comprehensive, state-of-the-art drone and swarm intelligence platform. The implementation covers:
Core Systems:
- Flight control with PX4/ArduPilot abstraction
- Multi-modal navigation (GNSS, VIO, SLAM)
- Swarm coordination and formation control
- AI cinematography and autonomous filming
State-of-the-Art Integration:
- Foundation models (Sapiens, YOLOv12, SAM 3)
- Graph neural networks for swarm intelligence
- 3D Gaussian Splatting for mapping
- Natural language drone control
- Event camera integration
- Advanced SLAM and VIO systems
Enterprise Capabilities:
- DaaS platform architecture
- Fleet management
- UTM integration
- Regulatory compliance (Part 107, Part 108 BVLOS)
Total Phase 33 Tasks: ~2,100+ comprehensive implementation tasks