Demeter turns soil, climate, and weather sensors into automatic care. This guide covers pairing devices, watching their data, and getting alerted — the foundation for automation.
Pair a sensor#
- Go to Sensors → Pairing (
/sensors/pairing). - Choose how the device connects:
- Direct protocol — MQTT, Zigbee, Z-Wave, Matter/Thread, Wi-Fi, BLE, or LoRa. See IoT device protocols for ranges and trade-offs (LoRa for far outdoor sensors, Zigbee/Thread indoors).
- A platform integration — GARDENA, Rachio, Ecowitt, Home Assistant, and more. See the integration guide.
- Assign the sensor to a garden (and optionally a bed), name it, and set its location. It now streams readings.
Watch the data#
- Sensors (
/sensors) — all devices, current values, and battery levels. - Sensor detail (
/sensors/:id) — one device's live + historical readings. - Visualization (
/sensors/visualization) and History (/sensors/history) — charts and trends over time. - Monitoring (
/sensors/monitoring) — a live overview across devices.
Get alerted#
Alerts (/sensors/alerts) lets you set per-sensor, per-metric thresholds
(e.g. "soil moisture below 25%", "temperature above 32°C"). When a threshold is
crossed you're notified by your chosen channels (email/push), with severity
(info/warning/critical) and escalation if it goes unacknowledged.
Calibrate & maintain#
Each sensor tracks a calibration timestamp and battery level; recalibrate from the device page to keep readings trustworthy. Malformed or out-of-range payloads are rejected so a faulty device can't corrupt your history.
Next#
Turn readings into action: set up rules so low moisture opens a valve, or heat opens a vent — see Automation.