Canonical source: the canonical features document for this domain is
deep-dive/features.md, rendered in the docs
center. This file is its operational companion (service topology, APIs,
schemas, runtime detail) — reconciled by linking, not duplicated (§2, §13).
Comprehensive robotics, kinematics, and fashion robotics infrastructure for
building humanoid robot systems that operate in retail, entertainment, and
fashion environments.
Table of Contents#
Core Robotics Framework#
The foundational layer providing shared types, constants, utilities, and error
definitions used across every Galatea library. All robot configurations,
coordinate frames, joint representations, and error codes originate here.
| Capability |
Description |
| Coordinate frame types |
Standardized 3D coordinate frame definitions for consistent spatial reasoning across all robot components |
| Joint angle representations |
Unified joint angle data structures supporting revolute, prismatic, and continuous joints |
| Robot configuration schemas |
Zod-validated configuration schemas for defining robot morphology, joint limits, and operational parameters |
| Error code system |
Comprehensive error code taxonomy covering kinematics failures, hardware faults, safety violations, and communication errors |
| Configuration management |
Centralized configuration system with validation, defaults, and runtime override support |
Kinematics and Dynamics#
Advanced computational kinematics for solving the spatial relationships between
robot joints and end effectors, enabling precise motion control.
Forward and Inverse Kinematics#
| Capability |
Description |
| Forward kinematics (FK) |
Compute end effector position and orientation from joint angles using Denavit-Hartenberg parameter chain evaluation |
| Analytical inverse kinematics |
Closed-form IK solutions for common kinematic configurations, providing fast and exact joint angle computation |
| Numerical IK solvers |
Multiple numerical IK methods: Jacobian transpose, damped least squares (Levenberg-Marquardt), and Cyclic Coordinate Descent (CCD) for arbitrary kinematic chains |
| Redundancy resolution |
Handle kinematic redundancy in humanoid robots by optimizing null-space objectives (posture, obstacle avoidance, energy minimization) |
| Workspace analysis |
Compute reachable workspace boundaries for any kinematic chain configuration |
Dynamics and Forces#
| Capability |
Description |
| Recursive Newton-Euler dynamics |
Compute joint torques required for any desired motion trajectory using recursive Newton-Euler algorithm |
| Inertia tensor computation |
Calculate link inertia tensors for dynamic motion planning and control |
| Torque calculation |
Determine the torques needed at each joint to achieve desired accelerations, accounting for gravity, Coriolis, and centrifugal forces |
| Gravity compensation |
Calculate gravity compensation torques for holding positions and smooth motion |
Collision and Safety Geometry#
| Capability |
Description |
| Swept volume collision detection |
Detect collisions along planned trajectories using swept volume analysis |
| Self-collision checking |
Prevent robot self-collision by checking link proximity during motion planning |
| Safety margin computation |
Calculate minimum clearance distances between robot links and obstacles |
| Collision-free path planning |
Plan trajectories that avoid obstacles while satisfying joint limits and smoothness constraints |
Supporting Computations#
| Capability |
Description |
| Jacobian computation |
Compute geometric and analytical Jacobian matrices for velocity-level control and singularity analysis |
| URDF/XACRO parser |
Parse standard URDF and XACRO robot description files to construct kinematic chain models |
| Singularity detection |
Identify and manage kinematic singularities through condition number monitoring and damping |
Hardware Abstraction#
A unified interface layer that abstracts physical robot hardware, enabling the
same control software to run on different robot platforms.
Joint and Actuator Control#
| Capability |
Description |
| Standardized joint interface |
Unified command/feedback API that works across DC motors, servo motors, BLDC motors, and series elastic actuators |
| Actuator profiles |
Characterization profiles for each actuator including torque curves, speed limits, thermal limits, and backlash measurements |
| Position/velocity/torque modes |
Support for position control, velocity control, and torque control modes on any actuator |
Sensor Fusion#
| Capability |
Description |
| Multi-sensor fusion |
Fuse data from IMUs, joint encoders, force/torque sensors, and vision systems into a coherent state estimate |
| State estimation |
Real-time robot state estimation combining proprioceptive and exteroceptive sensor data |
| Noise filtering |
Kalman and complementary filtering for sensor noise reduction |
Body Systems#
| Capability |
Description |
| Body morphing |
Configure body dimensions for different robot platforms through parameterized morphology |
| Facial expression system |
Control facial expression actuators (eyes, mouth, eyebrows) for emotional communication |
| Dexterous hand control |
Finger-level articulation control for object manipulation and gesture expression |
| Tactile skin sensing |
Process capacitive tactile skin sensor arrays for contact detection and force mapping |
| RFID reader interface |
Read RFID tags for garment identification and inventory tracking |
Thermal Management#
| Capability |
Description |
| Motor temperature monitoring |
Real-time thermal monitoring of all motor actuators |
| Thermal throttling |
Automatic performance throttling when actuators approach thermal limits |
| Electronics cooling |
Monitor and manage electronics cooling systems |
Bipedal Locomotion#
Walk, run, and navigate through complex environments with stable bipedal
locomotion.
Gait Planning#
| Capability |
Description |
| Walking gait generation |
Generate stable walking gaits at configurable speeds and step lengths |
| Running gait generation |
Dynamic running gait patterns with aerial phases |
| Configurable walking styles |
Parameterize walking style for pace, elegance, energy efficiency, and personality expression |
| Terrain-adaptive gaits |
Adjust gait parameters based on terrain type (smooth floor, carpet, ramp, uneven surface) |
Balance and Stability#
| Capability |
Description |
| ZMP balance control |
Zero Moment Point-based balance maintenance ensuring stability during locomotion |
| Center of pressure tracking |
Real-time center of pressure monitoring for stability assessment |
| Push recovery |
Recover from external disturbances using stepping strategies, hip strategies, and ankle strategies |
| Dynamic balance |
Maintain balance during dynamic motions (reaching, turning, carrying objects) |
Navigation#
| Capability |
Description |
| Footstep planning |
Plan optimal footstep sequences while avoiding obstacles |
| Stair navigation |
Ascend and descend stairs with terrain estimation and step adaptation |
| Obstacle avoidance |
Dynamically avoid obstacles detected during locomotion |
| Path following |
Follow planned paths with smooth trajectory tracking |
Whole-Body Motion Control#
Coordinate the entire robot body for natural, fluid movements that combine
locomotion, manipulation, and balance.
| Capability |
Description |
| Task-space control |
Control end effectors in Cartesian space while the controller handles joint-level coordination |
| Impedance control |
Variable impedance control for compliant interaction -- the robot yields naturally to external forces |
| Admittance control |
Force-to-motion control enabling safe physical human-robot interaction |
| Postural control |
Maintain a desired posture during task execution using null-space optimization |
| Center of mass control |
Track and regulate the center of mass for whole-body stability during any motion |
| Angular momentum control |
Regulate angular momentum for dynamic motions (turning, reaching, recovery) |
Computer Vision and Perception#
See and understand the environment through cameras and depth sensors, enabling
autonomous operation in retail and fashion spaces.
People and Audience#
| Capability |
Description |
| Person detection |
Detect people in the robot's field of view with pose estimation |
| Person tracking |
Track individuals over time as they move through the space |
| Audience awareness |
Detect audience presence, estimate group size, and track attention levels |
| Engagement estimation |
Estimate audience engagement based on gaze direction, proximity, and dwell time |
Garment and Fashion#
| Capability |
Description |
| Garment recognition |
Classify garment type, color, pattern, and style from camera images |
| Fit analysis |
Analyze garment fit on the robot or mannequin using visual measurement |
| Fashion trend analysis |
AI-powered analysis of fashion trends from visual data |
Environment and Navigation#
| Capability |
Description |
| SLAM |
Simultaneous Localization and Mapping for building and maintaining maps of indoor retail environments |
| Obstacle detection |
Detect static and dynamic obstacles for safe navigation |
| Depth processing |
Process depth camera data (Intel RealSense, ZED) for 3D scene understanding |
| Visual servoing |
Image-based and position-based visual servo control for precise alignment and manipulation |
Camera Systems#
| Capability |
Description |
| Camera-only perception |
Full perception pipeline using only RGB cameras, without requiring LiDAR or depth sensors |
| Attention prediction |
Predict where the robot should look next based on scene understanding |
AI and Robot Intelligence#
The intelligence layer that enables autonomous behavior, natural motion, and
meaningful human interaction.
Foundation Models#
| Capability |
Description |
| Vision-Language-Action runtime |
Run VLA models that take visual observations and language instructions and output motor actions |
| VLA fine-tuning pipeline |
Fine-tune VLA models on robot-specific data for improved task performance |
| Large Behavior Model |
Foundation behavior model fine-tuning for complex, long-horizon task execution |
| LBM evaluation suite |
Systematic evaluation of large behavior model performance across tasks |
| Motor cortex policy |
Motor cortex-inspired hierarchical control policies for coordinated multi-joint motion |
Behavioral Systems#
| Capability |
Description |
| Behavioral engine |
Finite state machine and behavior tree execution for structured robot behavior management |
| Natural motion generation |
Generate natural-looking motions from high-level descriptions (e.g., "wave hello", "present garment") |
| Emotion expression |
Generate and modulate emotional expressions through facial features, body posture, and gesture timing |
| Customer engagement |
Manage multi-turn customer interactions with dialog management and context awareness |
| LLM interaction |
Integrate large language models for conversational ability and knowledge-based responses |
Learning and Training#
| Capability |
Description |
| Reinforcement learning |
RL training infrastructure for learning locomotion, manipulation, and interaction policies |
| End-to-end neural control |
End-to-end neural network control policies that map directly from sensory input to motor output |
| Quiet locomotion |
Noise-minimized locomotion policy optimization for quiet operation in retail environments |
| Data collection |
Systematically collect robot experience data for training and evaluation |
| Training infrastructure |
Distributed training infrastructure for large-scale robot learning |
| Simulation farm management |
Manage fleets of simulation instances for parallel policy training |
Remote Operation#
| Capability |
Description |
| Teleoperation |
Remote teleoperation interface with force feedback and video streaming |
| VR teleoperation |
VR headset-based teleoperation with intuitive motion mapping |
| Sensor suit integration |
Capture human motion from sensor suits for teleoperation and motion demonstration |
Fashion Intelligence#
| Capability |
Description |
| Fashion trend AI |
Analyze runway trends, social media fashion data, and customer preferences for trend-informed behavior |
| Attention prediction |
Predict which items or displays will attract customer attention |
Safety and Compliance#
ISO 13482 compliant safety systems ensuring robots operate safely alongside
humans in public spaces.
Standards Compliance#
| Capability |
Description |
| ISO 13482 compliance |
Full compliance checking against the ISO 13482 personal care robot safety standard |
| Risk assessment |
Automated risk assessment with hazard identification, risk estimation, and risk evaluation |
| Regulatory toolkit |
Generate regulatory compliance documentation for CE marking, UL certification, and other market-specific requirements |
Real-Time Safety#
| Capability |
Description |
| Force and torque limiting |
Real-time force and torque limiting to prevent injury during human-robot contact |
| Emergency stop system |
Hardware and software emergency stop with safe state transition guarantees |
| Functional safety monitoring |
Continuous functional safety monitoring with watchdog timers and heartbeat checking |
| Safe state transitions |
Defined safe states that the robot enters on any safety violation |
Operational Safety#
| Capability |
Description |
| Safety-critical audit logging |
Tamper-resistant audit logging of all safety-critical events |
| Access control |
Physical and logical access control for robot operations (operator authentication, maintenance locks) |
| Alarm management |
Prioritized alarm management with escalation policies |
Robot Communication#
Network protocols for robot-to-robot coordination and cloud connectivity.
| Capability |
Description |
| EtherCAT master |
Industrial EtherCAT fieldbus master for deterministic real-time motor control communication |
| CAN FD interface |
CAN FD bus interface for communication with embedded sensors and actuators |
| DDS bridge |
Data Distribution Service bridge for ROS 2 interoperability |
| WiFi mesh networking |
Mesh network for multi-robot coordination without infrastructure dependency |
| Cloud connector |
Cloud platform connectivity for telemetry upload, software updates, and remote monitoring |
| IEEE 1588 PTP sync |
Precision Time Protocol synchronization across all robots for coordinated timing |
Firmware Management#
Low-level firmware abstraction and management for robot electronics.
| Capability |
Description |
| Motor driver firmware |
Interface with BLDC, stepper, and servo motor driver firmware |
| Sensor firmware protocols |
Sensor communication over SPI, I2C, and UART protocols |
| Safety controller firmware |
Hardware safety controller firmware interface for independent safety monitoring |
| Power management |
Battery management, power distribution, and charging control |
| RTOS runtime |
Real-time operating system runtime interface for deterministic task scheduling |
| Secure bootloader |
Secure bootloader with firmware update authentication and rollback protection |
| Board support packages |
BSPs for target hardware platforms enabling cross-platform firmware deployment |
Choreography and Shows#
Design, rehearse, and execute synchronized multi-robot performances with
lighting, music, and stage effects.
Show Design#
| Capability |
Description |
| Visual show designer |
Visual timeline editor with keyframe-based motion design for creating choreographed sequences |
| Show DSL |
Domain-specific scripting language for programmatic show authoring with loops, conditionals, and synchronization primitives |
| Formation engine |
Plan multi-robot formations and smooth transitions between formations |
| Stage mapper |
Map stage geometry including runway dimensions, obstacle locations, and robot staging positions |
Synchronization#
| Capability |
Description |
| Music synchronization |
Beat detection and music tempo synchronization for rhythm-aligned robot motion |
| Lighting bridge |
DMX and ArtNet lighting control integration for coordinated robot-light shows |
| Timing engine |
Sub-millisecond timing coordination across multiple robots and effects systems |
Production#
| Capability |
Description |
| Rehearsal engine |
Preview shows in simulation with collision checking before running on physical robots |
| Show scheduler |
Schedule shows with maintenance window management, battery charge planning, and wardrobe changes |
| Multi-robot coordination |
Orchestrate multiple robots performing different roles in a single choreographed show |
Fleet Management#
Manage, monitor, and maintain fleets of robots deployed across multiple
locations.
Operations#
| Capability |
Description |
| Task orchestration |
Allocate tasks across robots based on availability, capability, and location |
| Scheduling engine |
Schedule robot shifts, shows, maintenance, and charging with conflict resolution |
| Capacity planning |
Forecast fleet capacity needs based on demand patterns and growth projections |
Monitoring and Maintenance#
| Capability |
Description |
| Health monitoring |
Real-time health dashboards for every robot including motor temperatures, battery levels, and error rates |
| Remote diagnostics |
Diagnose robot issues remotely through log analysis, sensor data inspection, and interactive debugging |
| Incident management |
Track and resolve robot incidents with severity classification, root cause analysis, and resolution workflows |
| OTA updates |
Over-the-air firmware and software updates with staged rollout and automatic rollback |
Business Operations#
| Capability |
Description |
| RaaS billing |
Robotics-as-a-Service usage metering and billing for leased robot fleets |
| Federated learning |
Share learned behaviors across the fleet while keeping raw data local through federated learning |
| Digital nervous system |
Fleet-wide telemetry aggregation with anomaly detection and trend analysis |
Garment and Fashion Management#
Manage, track, and handle clothing and costumes for fashion robot deployments.
Garment Tracking#
| Capability |
Description |
| Outfit tracking |
RFID and vision-based tracking of every garment's location, status, and assignment |
| Digital product passport |
Digital provenance records for garments including materials, manufacturing, and ownership history |
| Wardrobe scheduling |
Schedule outfit rotations for fashion shows and retail displays with change-time accounting |
Garment Handling#
| Capability |
Description |
| Cloth manipulation |
Robotic cloth grasping, folding, and dressing assistance using learned manipulation policies |
| Quick-change mechanisms |
Rapid outfit change sequencing with mechanical quick-change systems |
| Fit validation |
Validate garment fit against robot body measurements before show time |
| Size adaptation |
Adapt garments to different robot body configurations through adjustable mounting systems |
Fabric Safety#
| Capability |
Description |
| Tear detection |
Detect fabric tears and damage before they worsen during shows |
| Sharp edge avoidance |
Ensure robot hardware does not have exposed edges that could damage garments |
| Fabric compatibility |
Assess fabric types for compatibility with robot motion and quick-change mechanisms |
Pose Engine#
Generate, optimize, and manage humanoid poses for natural and expressive robot
presence.
Pose Generation#
| Capability |
Description |
| Contrapposto solver |
Calculate classical contrapposto poses for natural, asymmetric standing positions |
| Breathing simulator |
Generate subtle breathing motion for lifelike presence when the robot is stationary |
| Micro-movement generation |
Generate small, continuous micro-movements to prevent the robot from appearing frozen or mechanical |
| Hand pose library |
Pre-defined hand gesture and pose library for communication and fashion presentation |
Pose Management#
| Capability |
Description |
| Full-body pose library |
Curated library of full-body poses including fashion model poses, greeting poses, and presentation poses |
| Pose optimizer |
Optimize poses under joint limit and stability constraints to find feasible configurations |
| Pose validation |
Validate pose safety and physical feasibility before execution |
| Transition planner |
Plan smooth, natural trajectories between poses with configurable interpolation |
Simulation and Digital Twin#
Test, preview, and monitor robots in simulation before and during physical
deployment.
Physics Simulation#
| Capability |
Description |
| Rigid body physics |
Full rigid body physics simulation for testing robot dynamics |
| Cloth simulation |
Simulate fabric behavior for garment fitting and motion planning |
| Wear simulation |
Simulate garment wear and tear over time for maintenance planning |
Digital Twin#
| Capability |
Description |
| Real-time digital twin |
Mirror the physical robot state in a digital twin in real-time for monitoring and debugging |
| Show preview |
Preview choreographed shows in simulation before physical rehearsal |
| Virtual showroom |
Customer-facing virtual showroom for remote demonstrations |
Training and Testing#
| Capability |
Description |
| RL training environment |
OpenAI Gym-compatible training environment for reinforcement learning policy development |
| Automated scenario testing |
Run automated test scenarios for safety validation and regression testing |
| Domain randomization |
Randomize simulation parameters for robust policy training |
Analytics and Business Intelligence#
Measure the business impact of robot deployments with engagement tracking,
revenue attribution, and operational analytics.
| Capability |
Description |
| Engagement tracking |
Track customer engagement duration, interaction count, and engagement quality per robot and per shift |
| A/B testing |
A/B test robot behaviors (greeting style, motion speed, expression intensity) to optimize engagement metrics |
| Traffic heatmaps |
Generate store traffic heatmaps from robot sensor data to inform store layout decisions |
| POS integration |
Integrate with point-of-sale systems to correlate robot interactions with purchases |
| Inventory bridge |
Connect to retail inventory systems for stock-aware robot behavior |
| Revenue attribution |
Model the revenue impact of robot interactions using multi-touch attribution |
| Reporting dashboard |
Aggregate analytics into executive reporting dashboards with customizable KPIs |
Developer SDK#
TypeScript client SDK for external developers building on the Galatea platform.
| Capability |
Description |
| Robot control client |
TypeScript client for sending commands to robots (motion, speech, expression) |
| Telemetry access |
Real-time telemetry data streaming from robots |
| Show management API |
API for creating, scheduling, and triggering choreographed shows |
| Analytics SDK |
Access engagement and business analytics data programmatically |
| Show SDK |
Purpose-built SDK for show designers and choreographers |
Database and Persistence#
Specialized data stores for robotics-specific data.
| Capability |
Description |
| Pose store |
Persistent storage for pose libraries with search and versioning |
| Event store |
Event sourcing store for robot lifecycle events |
| Telemetry store |
Time-series storage for high-frequency telemetry data |
| Garment store |
Garment inventory and tracking data persistence |
| Show store |
Show definitions, schedules, and performance records |
Inclusivity and Accessibility#
Design robots that represent and serve diverse audiences across cultures, body
types, and abilities.
| Capability |
Description |
| Accessibility adaptations |
Adapt robot behavior for visitors with different abilities (wheelchair users, visually impaired, hearing impaired) |
| Body profile configurations |
Configure diverse body proportions representing different body types, sizes, and morphologies |
| Cultural customizations |
Adapt greetings, gestures, personal space, and interaction style for different cultural markets |
| Multilingual support |
Multi-language support for spoken interactions, signage, and customer communication |
Event Processing#
Structured event handlers for processing robot system events in real-time.
| Capability |
Description |
| Robot status events |
Process robot status changes (online, offline, error, maintenance, performing) |
| Safety events |
Handle safety system events (emergency stop triggered, force limit exceeded, obstacle detected) |
| Garment events |
Track garment interactions (outfit change started, fit validated, garment damaged) |
| Show events |
Manage show performance events (show started, formation reached, music cue hit, show ended) |
| Customer interaction events |
Log customer interaction events (greeting initiated, question asked, purchase attributed) |
Capability Summary Tables#
Motion Control Stack#
| Layer |
Component |
Key Capability |
| Planning |
Kinematics |
FK/IK solving, Jacobian computation, collision avoidance |
| Planning |
Locomotion |
Gait generation, footstep planning, stair navigation |
| Control |
Whole-Body Control |
Task-space control, impedance control, balance regulation |
| Control |
Pose Engine |
Pose optimization, transition planning, micro-movements |
| Execution |
Hardware Abstraction |
Joint interface, sensor fusion, motor control |
| Execution |
Firmware |
Motor drivers, sensor protocols, safety controllers |
AI and Intelligence Stack#
| Layer |
Component |
Key Capability |
| Foundation |
VLA Runtime |
Vision-language-action model inference and fine-tuning |
| Foundation |
Large Behavior Model |
Complex, long-horizon task execution |
| Behavior |
Behavioral Engine |
FSM and behavior tree execution |
| Behavior |
Natural Motion Gen |
Generate motions from text descriptions |
| Learning |
Reinforcement Learning |
Policy learning in simulation and real world |
| Learning |
Training Infrastructure |
Distributed training, simulation farms |
| Interaction |
Customer Engagement |
Dialog management, context tracking |
| Interaction |
Emotion Expression |
Facial expression, body language, gesture timing |
Safety Framework#
| Aspect |
Mechanism |
Standard |
| Force safety |
Real-time force/torque limiting |
ISO 13482 |
| Emergency response |
Hardware and software E-stop with safe state transitions |
IEC 60204 |
| Collision prevention |
Swept volume analysis, self-collision checking |
ISO 13482 |
| Functional safety |
Watchdog timers, heartbeat monitoring |
IEC 61508 |
| Audit |
Tamper-resistant safety event logging |
ISO 13482 |
| Access control |
Operator authentication, maintenance locks |
ISO 13482 |
Communication Protocols#
| Protocol |
Purpose |
Real-Time |
Use Case |
| EtherCAT |
Motor control |
Sub-millisecond |
Joint-level control loop |
| CAN FD |
Embedded devices |
Millisecond |
Sensor and actuator communication |
| DDS |
ROS 2 interop |
Configurable |
Module-to-module data sharing |
| WiFi Mesh |
Multi-robot |
Best-effort |
Fleet coordination and telemetry |
| IEEE 1588 PTP |
Time sync |
Microsecond |
Synchronized multi-robot choreography |
| Cloud |
Remote ops |
Best-effort |
Telemetry upload, OTA updates |
Deployment Model#
| Scenario |
Key Capabilities Used |
| Fashion show |
Choreography, garment management, formation engine, lighting bridge, music sync |
| Retail greeting |
Customer engagement, person detection, LLM interaction, emotion expression |
| Store display |
Pose library, micro-movements, breathing simulation, outfit tracking |
| Interactive demo |
VLA runtime, natural motion gen, speech interaction, visual servoing |
| Fleet operation |
Task orchestration, health monitoring, OTA updates, RaaS billing |
| Training data collection |
Teleoperation, data collection, simulation, federated learning |